What are the timing specs for 92 Chevy Caprice?
0 degrees in drive bypass disconnected
How do you set the timing on a 92 Chevy caprice classic with either 305 0r 350?
with the v/advance unplugged bring your idle up to 3000rpm and set you timing at 32 while revving. now tighten down the distributor and plug you v/a back in, and voi-la your done. that year doesn't have a vacuum advance... he said 92 caprice not 82........you need to find the EST remove it and set the timing to 0 then plug the est back in and the computer takes over
What is 8 degrees before top dead center when timing a 92 Chevy caprice?
TDC, top dead center is when the number 1 piston is at the top of the cylinder. 8 degrees before TDC is where you set the distributor so that is when the spark plug fires. You use a timing light to set the distributor. There is a timing mark on the crankshaft pulley and a series of marks on the timing chain cover that will show where 8 degrees before is at. The timing mark…
If the timing is off in a '92 Mercury Topaz how do you fix it?
the timing is usually set by adjusting the distributor and using a timing light on the number one cylinder and pointing the light at the harmonic balancer on the bottom of the engine crankshaft pulley,the timing mark on thr balancer should be marked on the correct degree for example 10 degrees before top dead center. as the distributor is turned the timing on the light will adjust to the balancer . to get the correct…