Want this question answered?
What_are_the_torque_settings_and_tightening_sequence_for_the_cylinder_head_bolts_on_a_Rover_200_K-series_engine
Rover 20T2N 2.0Ltr Diesel engine Cam cover torques are listed as 12 Nm. No tightening sequence is listed .
the cycle the engine moves
20nm then 180degrees then another 180 degrees Left to right back row 9,5,1,3,7 (back row nearest windscreen) Left to right front row 10,6,2,4,8 (front row nearest radiator)
Sequence 7 1 3 5 8 4 2 6 bolts 5&6 are the flywheel side of the engine Torque Stage 1. 40-45Nm Stage 2. 85-90Nm.
What are cylinder head bolts torque settings for Isuzu kb240. Engine NAQ001716
what are the torque settings for a mitsubishi 4m51 engine
I was just on the Toyota Owners Club site and found this information from Martin_Longbow; Toyota Carina E 2.0Ltr D Turbo 1996 - 98 (2C-T) Head tightening sequence (new bolts not required) Stage 1, 44 Nm Stage 2, Tighten 90 Degrees Stage 3, Tighten 90 Degrees On the older ones there is a four stage sequence and there are 18 bolts according to the diagrame I have for the tightening sequence I hope it's of some help.
316i engine code 16 4E2 Head bolts must be renewed Torque settings stage 1. 30Nm stage 2. + 90 degrees stage 3. + 90 degrees Tightening sequence 7 5 1 3 9 10 4 2 6 8 Bolts 7 & 10 are the flywheel side of the engine
Cylinder head bolt tightening sequence Intake side of engine (Rear) left to right (pass to driver) 8 4 1 5 9 Intake side (frount) left to right 7 3 2 6 10 This is the cylinder head bolt tightening sequence for a 1.9 DOHC engine. Torque as follows: Step 1-First torque=48 ftlbs Step 2-Remove bolts (using the opposite of the tightening sequence) Coat the threads with engine oil reinstall bolts. In sequence tighten first to 22 ftlbs, then to 37 ftlbs. Step 3-Finally tighten all bolts an additional 1/4 turn. Torque Specs for intake: 22ftlbs. The bolts in the rear of the engine (passenger to driverside) are 8 4 1 5 9 In the frount of the engine it is 7 3 2 6 10. It should be a clockwise spiral.
polo torque settings 1200 engine main bearing
The rocker box bolt torque specifications, on your Harley-Davidson, is 15 pounds per square inch. The bolts should be torqued in five pound intervals.