Want this question answered?
The 1997 Pontiac Transport 3400 rocker arm torque specifications are 18 pounds. The rocker arm should be torqued in six pound intervals.
Yes the 2.2 is zero tolorence there is no adjustment on the rocker arms and the head bolts are torque to yeild. so if you have a ticking other then the injectors you need to replace the lifters and they are roller,
service manual, it could be found at library or bought at parts store.
The rocker arm torque specifications, for your 1990 4.3 liter Chevrolet engine, is 15 pounds per square inch. The rocker arm should be torqued in five pound intervals.
By removing the valve cover from the engine, then removing the rocker nut on the bad rocker. Refer to a technical manual for torque specifications, as this must be properly torqued!!!
According to most Oldmobile torque specs, the correct torque for rocker arm bolts is 25 ft-lbs.
The torque specifications fourth the rocker arms, on your C 15 Caterpillar diesel engine, is 14 pounds per square inch. The rocker arm should be torqued at seven pound intervals.
20 foot pounds.
For the 1989 Chevy S-10 with the 2.5 liter engine, the torque setting for the rocker arm bolt is 22 ft. lbs. The torque setting for the rocker arm cover is 75-inch lbs.
what should you torque the rocker arms to when you reinstall the push-rods to on a 3.4 pontiac
The rocker box bolt torque specifications, on your Harley-Davidson, is 15 pounds per square inch. The bolts should be torqued in five pound intervals.
The rocker box bolt torque specifications, on your Harley-Davidson, is 15 pounds per square inch. The bolts should be torqued in five pound intervals.