105 in lbs
144 in-lbs
35flp
call the dealer and ask, if they're nice, they'll tell you.......or any repair shop for that matter
You need to let us know which torque specs you need.
12ft pounds
pull the trans. and ther are 5=6 bolts
Bump the starter so you can get at them 1 at a time from underneath.
The torque wrench is used to set nuts at the proper torque. Especially useful where you have lots of nuts or bolts and want them all to be the same, such as trans pans, cylinder heads,etc.
you gotta remove the trans and it is the first thing you see inside the open end of the trans - a large round donut looking steel thing with a short shaft in the middle with a hole in it. You have to loosen three bolts that connect the torque conv to the flywheel it is easiest to loosen these three bolts through the hole left by removing the starter first
amsoil torque synthic
13 FT. LBS or 17 N.m That is for the 42re transmission The 46RE is the same also. Good Luck.
no