In my 86-96 aerostar repair manual it says to use new bolts , tighten the bolts over a 3 step sequence to the torque required. Here is the sequence
5 1 3 7
6 4 2 8
Step 1 44lbs step 2 tighten intake mainifold to 36 -72 in lbs step 3 59lbs step 4 tighten intake manifold to 72 to 132lbs in-lbs step 5 turn cylinder head bolts an additional 80 to 85 degrees
step 5 complet intake mailfold torque steps 3 and 4
i copied it word for word
Torque specs for main bearing
wich bolts do you need the specs on
A C15 Caterpillar engine has dozens of torque specifications for many different engine bolts. The head bolts should be torqued at 350 pounds.
For the 1996 Chevy S-10 4.3 liter, the torque specs for the crankshaft damper bolts is 70 ft. lbs. For the cylinder head bolts, the torque is 65 ft. lbs, and for the engine mount-to-head bolts, the torque is 35 ft. lbs. For the engine mount-to-frame bolts, the torque is 52 ft. lbs.
For the head bolts, 37lbs
What is the torque specs for Head bolts for 2003 Johnson 4 stroke 140 hp outboard boat engine
There are a lot of bolts on the engine and we don't know what bolts your talking about, there are different torque specs all over the engine, I would say that you should go to the library and get a chiltons repair manual for your car and it will tell you the specs your looking for.
torque especifications for Malibu 1999 3.1 engine
Torque specs for a 1995 subaru impreza 2.2 head bolts?
what torque specs on cam shaft bolts 2000 saturn 2.2
The torque specs for 660 raptor head and hex bolts is about 26 lbs.
The torque specs for a Cadillac depend on which engine it has. For most 425, 572, 368, and 500 engines, the torque for the head bolts is 115 ft. pounds. The torque for the cam bolts is 25 ft. pounds, and the torque for the valve covers is 10 ft. pounds.
Torque specs for brake caliper bolts 2005 mazda 6
The headbolt torque for a the 350 Big Cam is 285 footpounds
For the 1987 Chevrolet S-10 with a 2.8 liter engine, the torque specs for the cylinder head bolts is 40 ft. lbs. The torque specs for the crankshaft damper bolt is 70 ft. lbs. For the oil pump bolts and the oxygen sensor, the torque is 30 ft. lbs.
The front axle torque specs of a 1999 Saturn is 41 ft lbs. It is the axle shaft support bracket to engine bolts.?æ
Torque specs can be found in the Haynes Auto Manual.
This is the link to Autozone DIY section. It has all the torque specs for the entire 1.9 engine and others. Copy and paste it in your browser. http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528008db67
What are the torque specs for a 1996 Chevy cavalier 2.2l
what is the torque for the bolts on the clutch springs for a trx 90/>
If you need the torque specs for every single bolt in that whole engine, that is a pretty tall order. Or are you just needing one particular part of the engine, like the head bolts?
which bolts are you talking about? every different size bolt has a different torque spec.
torque specs axel not and wheel hub bolts
The 1984 258 cubic inch engine rocker arm bolt torque specification is 30 pounds. You should torque the rocker arm bolts in 15 pound intervals.