answersLogoWhite

0


Best Answer

Answer by Techsupport

There are different types of Media Access Control methods in a LAN, the prominent ones are mentioned below :

=> Ethernet - Ethernet is a 10Mbps LAN that uses the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) protocol to control access network. When an endstation (network device) transmits data, every endstation on the LAN receives it. Each endstation checks the data packet to see whether the destination address matches its own address. If the addresses match, the endstation accepts and processes the packet. If they do not match, it disregards the packet. If two endstations transmit data simultaneously, a collision occurs and the result is a composite, garbled message. All endstations on the network, including the transmitting endstations, detect the collision and ignore the message. Each endstation that wants to transmit waits a random amount of time and then attempts to transmit again. This method is usually used for traditional Ethernet LAN.

=> Token Ring - This is a 4-Mbps or 16-Mbps token-passing method, operating in a ring topology. Devices on a Token Ring network get access to the media through token passing. Token and data pass to each station on the ring. The devices pass the token around the ring until one of the computer who wants to transmit data , takes the token and replaces it with a frame. Each device passes the frame to the next device, until the frame reaches its destination. As the frame passes to the intended recipient, the recipient sets certain bits in the frame to indicate that it received the frame. The original sender of the frame strips the frame data off the ring and issues a new token.

=> Fast Ethernet - This is an extension of 10Mbps Ethernet standard and supports speed upto 100Mbps. The access method used is CSMA/CD .For physical connections Star wiring topology is used. Fast Ethernet is becoming very popular as an upgradation from 10Mbps Ethernet LAN to Fast Ethernet LAN is quite easy.

=> FDDI (Fiber Distributed Data Interface) - FDDI provides data speed at 100Mbps which is faster than Token Ring and Ethernet LANs . FDDI comprise two independent, counter-rotating rings : a primary ring and a secondary ring. Data flows in opposite directions on the rings. The counter-rotating ring architecture prevents data loss in the event of a link failure, a node failure, or the failure of both the primary and secondary links between any two nodes. This technology is usually implemented for a backbone network.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

14y ago

its called MAN (Metropolitan Area Network). It is optimized for a larger geographical area than a LAN, ranging from several blocks of buildings to entire cities. MAN can also depend on communications channels of moderate to high data rates. MAN might be owned and operated by a single organization, but it usually will be used by many individuals and organizations. MAN might also be owned and operated as public utilities. They will often provide means for internetworking of Local Network. Metropolitan area networks can span up to 50km, devices used are modems and wire/cable.

Some technologies used for this purpose are ATM, FDDI, and SMDS. These older technologies are in the process of being displaced by Ethernet-based MANs (e.g. Metro Ethernet) in most areas. MAN links between LANs have been built without cables using either microwave, radio, or infra-red laser links. Most companies rent or lease circuits from common carriers due to the fact that laying long stretches of cable can be expensive.

DQDB, Distributed Queue Dual Bus, is the Metropolitan Area Network standard for data communication. It is specified in the IEEE 802.6 standard. Using DQDB, networks can be up to 20 miles (30 km) long and operate at speeds of 34 to 155 Mbit/s.

Regards

This answer is:
User Avatar

User Avatar

Wiki User

8y ago

It is a gathering of two or more PC frameworks connected together. There are numerous sorts of PC systems, including the accompanying: neighborhood (LANs): The PCs are topographically near one another.

Types:

a.)PAN

b.)LAN

c.)MAN

d.)WAN

e.)WAN

f.)SAN

g.)EPN

h.)VPN

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What are the types of LAN technologies?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What does Symbol Technologies do?

The company Symbol Technologies produces mobile data interaction equipment, like: Wireless LAN infrastructure, mobile computers, among other types of hardware.


What are the Types of LAN card?

tow tyap of lan card


What has the author Courage Ackuaku written?

Courage Ackuaku has written: 'Lan- Wan-Lan interconnect,problems,issues,current and future technologies'


What is the speed of LAN?

LANs typically range in speed from 10 Mbps to 1 Gbps, although some newer LAN technologies are boosting the speed to 10 Gbps at least.


What are three things that can be used by a computer network?

all technologies depend on information resources


What are three trends that may be viewed as examples of emerging technologies?

there are three types of technologies


What are the Types of networking device?

1. Lan Cards 2. Lan cables 3. Repeaters 4. Hub 5. Switches.


What are types of network devices?

1. Lan Cards 2. Lan cables 3. Repeaters 4. Hub 5. Switches.


Which technologies are consider to be WAN technologies?

Wide Area Network = Internet This baciscally means anything outside your loca network. LAN = Local Area Network Your laptops' + PC +router for example. That's the simple answer.


What are the 4 types of area network?

LAN,WAN,MAN,PAN


What are the types of connections for intermediate and end device connections in a LAN?

toast


What are some of the subject areas covered in the CWNA?

The subject areas covered in CWNA are Radio technologies, Antenna concepts, Wireless LAN harware and software , Network Design installation, Wireless LAN Security, TroubleShooting and much more .