The 'dent' is a spout for pouring liquid
Concave means that it bows inward (a dent instead of a bulge). Planoconcave means that one side is flat and the other side is concave.
I noticed there was a dent in the side of the saucepan after I dropped it on the floor.
Some companies offer a paintless dent removal srvice which is priced by size of dent and location. other than that get behind the dent with a small flat object wood or metal and hammer the block to get rid of the dent. If dent is small use a picking hammer and with the point work around the circle of the dent with the point trying to keep it even with the outside surface. Sand the surface when you get close and go to the flat side of a body hammer and smooth the outside where it got picked out, Apply a small amount fo body filler and sand to even the suface prime sand prime sand with different grits and repaint the surface
try pop a dent or if you can get it out with that try a rubber mallet if you can get to the back side of it
Answer:No, A Sphere Is Completely Round it Has No Flat Side what So Ever.
A cone.
No. You need to visit a store or go to their website.
The flat side marks the cathode, or negative wire coming out of the LED. Make sure that the wire on the flat side is connected to ground.
take a hair dryer to it for 30 sec to 1 mintute then flip a can of air duster upside down spray generously an wait the dent will come out and there is no damage to the paint
Passenger side. Its that flat cover with all those screws in it. It is a big process to get off.
Wire side down in a drawer, nested like spoons
No. A side normally means a flat surface and a sphere does not have one. It does have one curved surface.