Want this question answered?
On the torque converter. Do a Google search and read about torque converters.
Torque converter bolts No. Fly-wheel bolts YES.
Usually with bolts.
No you can't get to them. The converter is in the way.
In the transmission held on by 3 bolts
What are the torque specifications and the tightening sequence of the cylinder head bolts on a 1996 Saturn SL1?
310Nm (230ft/lbs) Dry Zinc Plated
25lb/ft
Loose converter bolts or a cracked pressure plate.
The Torque Converter is part of the transmission, not part of the engine. The torque converter needs to come off with the transmission. You need to remove the starter to access the torque converter bolts/nuts and separate it from the flex plate. Besides loosing all of the fluid in the torque converter, you stand to damage converter seals and/or the pump if the converter isn't properly installed in the transmission.
Torque for valve cover bolts is 7 to 10 ft. Lbs . Tighten the bolts in a criss-cross pattern .
The Toyota Corolla 1.8 liter engine rod bolt torque specification is 120 pounds. The bolts should be torqued in 40 pound intervals.