serial and parellel transmission
A bus consists of wires which is used to transfer data either in serial or parallel transmission.
data bus, system bus and host bus.
A bus transfer is basically proof that you paid. It is also used whenever you need to take two buses to get to your destination. For example, if you need to go northeast then you'll probably need to take two buses. You pay the price for the first bus you get on and ask the bus driver for a transfer after you pay. After you get off the first bus and get onto the second bus, you just need to show the transfer to the bus driver and he or she will let you in unless it is expired because there's a one-hour time limit. If you're not sure what I'm saying, you can ask the bus driver for a transfer and look at the back of it. There's usually some information about how to use it.
bus
Because its a microcontroller with an 8 bit data bus width.
Bus :- Bus is a transmission medium which is used to transfer the data or information from one device to other device. There are three types of bus 1. Address Bus 2. Data Bus 3. Control Bus
A bus consists of wires which is used to transfer data either in serial or parallel transmission.
Absolutely not. A 2MHz 8-bit bus can transfer 2MB per second; a 4MHz 8-bit bus can transfer 4MB per second.
A Parallel bus has a relatively large number of wires bundled together that enable data to be transferred in parallel. This increases the throughput, or rate of data transfer, between the peripheral and the computer. A Serial bus can be defined as a transmission path over which the participants transmit their data serially, sequentially in time, and using a common medium. In the case of serial transmission, only a single communication link for transferring data from any given end to another one. In the case of parallel transmission, we use multiple numbers of parallel links for the simultaneous transmission of all the data bits in the network.
A data bus is used to transfer data. In Computer Information Systems in school (Dual-Enrolled)
A digital data transmission occurs in a computer bus. The data are in the form of electromagnetic signal, such as an electrical voltage, microwave, radiowave, or infrared signal.
display
A complete data bus structure is responsible to do this
There are 2 kinds Data bus and address bus data bus which carries the data ( includes both instruction and data). address bus which carries where the data in the data bus must be sent to in the RAM or which I/O device has to be active to read / write data to the data bus .
16-bit bus means the bus has 16 parallel wires for data transfer. That allows it to transfer 16 bits at a time.
The three types of bus present in every CPU are address bus, data bus and control bus.
A Bus is a large transport vehicle, if you put it in a computer it would damage it consierably or likely destroy it, thus stopping data transfer