autozone, pepboys, nationwise, NAPA, and most auto parts stores can get it for you overnight if they don't have it.
Where is the tensioner pully on a 1992 Lexus sc300
There should be a small square hole near the tensioner pully. A 3/8 socket driver will fit in the hole and then you can losen the tensioner.
With a self adjusting tensioner pulley, there is no adjustment for tension.
No you can not. If belt is loose, are won't fit then you have the wrong belt. The belt tensioner is spring loaded and that is what tightens the belt.
there should be a tensioner pully. Put the 3/8 ratchet in the center of it and turn.
The tensioner pully is just to the left of the alternator. It is an arm with a round pully on the end of it. It has a square 3/8 ratchet attatchment. It is about 7 inches long.
CHECK THE IDELER PULLY OR BELT TENSIONER PULLY.
its on the left side. its the easyest pully to see.
Replace tentioner pully on 2.8 multiport
wrap the belt around the pully to hold pully still
You must loosen the nut on the tensioner pully the from under the car there is a tensioning bolt 12mm you will tighten it and it will pull the pully down then take the belt off, new one on, then loosen the tensioner bolt til the belts tight and tighten the bolt in the middle of the pully then your all done
A spring loaded pully that keeps the serpentine belt tight