0
Addresses 80 - 87H are assigned to the P0 port
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
How do you write Verilog code for modified booth encoder?
1.booth encoder module:module booth_encode(input [2:0] X,output reg[2:0] SDN);always @ (X)beginif(X==8'b000) SDN=3'b000;else if(X==3'b001) SDN=3'b100;else if(X==3'b010) SDN=3'b100;else if(X==3'b011) SDN=3'b010;else if(X==3'b100) SDN=3'b011;else if(X==3'b101) SDN=3'b101;else if(X==3'b110) SDN=3'b101;else if(X==3'b111) SDN=3'b000;else SDN=3'bx;endendmodule2.Booth decoder module:module booth_decoder(input [7:0] Y,input [2:0] beo,output reg[8:0] bdo);reg [8:0]A;reg [7:0]X;always @(Y,beo)begincase(beo)3'b000:bdo=9'b000000000;3'b100:bdo={1'b0,Y};3'b101:beginX=(~Y)+1'b1;bdo={1'b1,X};end3'b010:bdo={Y,1'b0};3'b011:beginA={Y,1'b0};bdo=(~A)+1'b1;endendcaseendendmodule3.carry save adder module:module csa(input [14:0] P0,input [12:0] P1,input [10:0] P2,input [8:0] P3,output [14:0] P);wire sb,sc,sd,se,sf,sg,sh,si,sj,sk,sl,sm,sb1,sc1,sd1,se1,sf1,sg1,sh1,si1,sj1,sk1,sl1,sm1,ca,cb,cc,cd,ce,cf,cg,ch,ci,cj,ck,cl,cm,ca1,cb1,cc1,cd1,ce1,cf1,cg1,ch1,ci1,cj1,ck1,cl1,c00,c01,c1,c2,c3,c4,c5,c6,c7,c8,c9,c10,c11;hah01(P0[0],1'b0,P[0],c00);ha h02(P0[1],1'b0,P[1],c01);ha h1(P0[2],P1[0],P[2],ca);ha h2(P0[3],P1[1],sb,cb);fa f01(P0[4],P1[2],P2[0],sc,cc);fa f02(P0[5],P1[3],P2[1],sd,cd);fa f03(P0[6],P1[4],P2[2],se,ce);fa f04(P0[7],P1[5],P2[3],sf,cf);fa f05(P0[8],P1[6],P2[4],sg,cg);fa f06(P0[9],P1[7],P2[5],sh,ch);fa f07(P0[10],P1[8],P2[6],si,ci);fa f08(P0[11],P1[9],P2[7],sj,cj);fa f09(P0[12],P1[10],P2[8],sk,ck);fa f010(P0[13],P1[11],P2[9],sl,cl);fa f011(P0[14],P1[12],P2[10],sm,cm);ha h3(sb,ca,P[3],ca1);ha h4(sc,cb,sc1,cb1);ha h5(sd,cc,sd1,cc1);fa f11(se,cd,P3[0],se1,cd1);fa f12(sf,ce,P3[1],sf1,ce1);fa f13(sg,cf,P3[2],sg1,cf1);fa f14(sh,cg,P3[3],sh1,cg1);fa f15(si,ch,P3[4],si1,ch1);fa f16(sj,ci,P3[5],sj1,ci1);fa f17(sk,cj,P3[6],sk1,cj1);fa f18(sl,ck,P3[7],sl1,ck1);fa f19(sm,cl,P3[8],sm1,cl1);ha h6(sc1,ca1,P[4],c1);fa f1(c1,sd1,cb1,P[5],c2);fa f2(c2,se1,cc1,P[6],c3);fa f3(c3,sf1,cd1,P[7],c4);fa f4(c4,sg1,ce1,P[8],c5);fa f5(c5,sh1,cf1,P[9],c6);fa f6(c6,si1,cg1,P[10],c7);fa f7(c7,sj1,ch1,P[11],c8);fa f8(c8,sk1,ci1,P[12],c9);fa f9(c9,sl1,cj1,P[13],c10);fa f10(c10,sm1,ck1,P[14],c11);endmodule4.half adder module:module ha(input a,input b,output sum,output carry);xor x1(sum,a,b);and a1(carry,a,b);endmodule5.full adder module:module fa(input a,input b,input c,output sum,output carry);wire w1,w2,w3;ha h1(a,b,w1,w2);ha h2(w1,c,sum,w3);or o1(carry,w2,w3);endmodule6.Final module:module final_module(input [7:0] X,input [7:0] Y,output [14:0] P);reg [2:0]a,b,c,d;wire [2:0]sdn1,sdn2,sdn3,sdn4;wire [8:0]p0,p1,p2,p3;wire [14:0]p00;wire [12:0]p01;wire [10:0]p02;always @(X)begina={X[1],X[0],1'b0};b={X[3],X[2],X[1]};c={X[5],X[4],X[3]};d={X[7],X[6],X[5]};endbooth_encode b1(a,sdn1);booth_decoder d1(Y,sdn1,p0);assign p00=p0[8]?{6'b111111,p0}:{6'b000000,p0};booth_encode b2(b,sdn2);booth_decoder d2(Y,sdn2,p1);assign p01=p1[8]?{4'b1111,p1[8:0]}:{4'b0000,p1[8:0]};booth_encode b3(c,sdn3);booth_decoder d3(Y,sdn3,p2);assign p02=p2[8]?{2'b11,p2}:{2'b00,p2};booth_encode b4(d,sdn4);booth_decoder d4(Y,sdn4,p3);csa c1(p00,p01,p02,p3,P);endmodule
How ICs are named?
The names of most ICs are just arbitrarily assigned numbers.
Why half adder is so called?
A full adder has a sum bit and a carry bit. A half adder just has a sum bit.
Tactically assigned resources would find their work assignment on what ICS form?
ICS 204
Design 2-bit comparator using gates?
2 bit comparator = 1bit magnitude comparator +1 bit magnitude comparator if A>B =A(~B)(B bar); if A<B = ~A.B; A==B = AB + (~A)(~B); block of instruction shown above is for 1 bit comparator means if A>B ==true then High bit is set on (A>B) output. if A<B true then high bit is set on (A==B) output, If we cascade two 1 bit comparator then we can design 2-bit comparator...
How are house numbers assigned?
addresses are 32-bit numbers often expressed as 4 octets in "dotted decimal" notation (for ... Internet Corporation for Assigned Names and Numbers ...
Can an aneroid barometer be used to indicate changes in elevation as well as air pressure?
asawqtgrbikn[p0-[p0-[p0-[p0-[p0-[p0-[p0-[p0-
What are IP addresses that are not assigned from an available pool of IP addresses?
They are static.
How are URLs assigned to IP addresses?
URLs are assigned randomly to differently IP addresses. IP addresses are the numbers that identify a person's location online; it gives the general location and device.
Why the all zeros and all ones addresses are usually not assigned as host IP addresses?
These addresses are not assigned to devices because they have a reserved meaning. All zeroes refers to "this network", and all ones usually is assigned to a broadcast address (all devices).
What is the formula for linear interpolation?
pu = p0 + u(p1 - p0)
Are sets of words that are assigned to specific IP addresses?
Domain name
How millions of computers are addressed with just 32 bits?
Internet addresses of computers are currently covered by Internet Protocol version 4 (IPv4), which has a 32 bit address space.Imagine you had only 1 bit long addresses. Then you could have only 2 different addresses - address 0 and address 1. But if you had 2 bit long addresses, you get 4 possible addresses - 00, 01, 10, 11. If you had 3 bit long addresses, you would have 8 possible addresses - 000, 001, 010, 011, 100, 101, 110, 111. Every time you add a new address bit, you double the number of addresses possible.1 bit = 2 addresses2 bits = 4 addresses3 bits = 8 addresses4 bits = 16 addresses5 bits = 32 addresses...Since each address bit doubles the number of possible addresses, a 32 bit address space covers 232 possible addresses, or over 4,000,000,000. And this is only for unique addresses that the whole world can use; many computers are in private networks (inside corporations, for example) and do not need an external IPv4 address. They talk to the outside world through a few routers which DO have IPv4 addresses. So a company might have tens of thousands of computers, but only a few dozen IPv4 addresses that are assigned to the routers they have connected to the internet.Even so, all 4,000,000,000 of the IPv4 addresses have finally been allocated and will be used up over the next several months. This means that the internet will need to migrate to a newer addressing version, IPv6. IPv6 uses 128 bit addressing. 2128 is about 3.4x1038 addresses. That's 3,400,000,000,000,000,000,000,000,000,000,000,000,000 addresses. They should last us a while.
How are IP addresses assigned from a pool of IP addresses?
That means that the DHCP server keeps track of what IP addresses - out of a pool (or set) of addresses - have been assigned. Any time a host (computer or similar) requests an IP address, the DHCP server will assign an available address and mark it, in its memory, as "assigned" so it won't assign the same address to another computer.That means that the DHCP server keeps track of what IP addresses - out of a pool (or set) of addresses - have been assigned. Any time a host (computer or similar) requests an IP address, the DHCP server will assign an available address and mark it, in its memory, as "assigned" so it won't assign the same address to another computer.That means that the DHCP server keeps track of what IP addresses - out of a pool (or set) of addresses - have been assigned. Any time a host (computer or similar) requests an IP address, the DHCP server will assign an available address and mark it, in its memory, as "assigned" so it won't assign the same address to another computer.That means that the DHCP server keeps track of what IP addresses - out of a pool (or set) of addresses - have been assigned. Any time a host (computer or similar) requests an IP address, the DHCP server will assign an available address and mark it, in its memory, as "assigned" so it won't assign the same address to another computer.
How does your ip gets assigned?
IP addresses are assigned by the network administrator, or ISP. The computer does have to be configured manually to respond to that specific address.
What IP addresses might have been assigned by APIPA?
169.180.23.5
What is a bit of punctuation used in internet addresses?
For V4 addresses they are separated by a period (.). For V6 addresses they are separated by a colon (:)
