The way to check the level of your brake fluid is to remove the cap on the brake fluid reservoir and read the dipstick. There may also just be a line on the reservoir that says 'Full.' If your brake fluid does not reach that level, add type DOT 3 brake fluid.
Where is the brake fluid filler located on a 2004 Toyota Corolla?
When refilling brake fluid it is important to use the correct type of fluid for the car. For a 1995 Toyota Corolla the correct fluid is brake fluid dot 3 or brake fluid dot 4.
Check owner's manual! Important to use right fluid.
Most probably indicating that your brake pads are almost finished and need to be replaced. Check that, if not check your brake fluid level.
Check your brake fluid level.
same as brake fluid resevoir
The fluid in the clutch master cylinder is brake fluid. Use DOT 3 or similar brake fluid for fluid replacement.
it says on the master cylinder cap. it should be Dot 3 brake fluid
"Maint Req" stands for Maintenance Required - oil change, transmission fluid addition, brake fluid, battery check, tire pressure, brake pads, etc. Check your owners manual for the car to see what's required and how often.
If you are driving and need to brake, but find your brake pedal is getting closer and closer to the floorboard, you need the check your fluid. Eventually your brakes will not have enough fluid to create the pressure needed to apply the brake pads properly and you risk accidents.
With engine running in Park and E~brake set, pull dipstick and look at marks and fluid level. The dipstick has marks for cold or warmed up.
Dot 3