Want this question answered?
You need a double element bulb.
See sources and related links below for the brake lamp and light bulb list information.
In order to change the brake light, check your manual for directions. You will need to remove the cover and replace the burnt out bulb.
The Integra uses a dual-filament bulb in the tail light, which has one contact for the running light (the lights you turn on at night) and another brighter one for the brake light (only goes on when you press the brake pedal). You have replaced the bulb with the wrong type. You will need a 2057 bulb for the Integra.
To replace the brake light bulb you need to remove the whole light assembly. Once removed the change is simple.
either you have a blown bulb, low brake fluid or you need new brake pads
To replace your brake light, you need to unscrew the brake cover from the inside of the trunk. Then you will be able to pull the old bulb out and replace it.
You need to change the bulb. The filiment for the brake light part of the bulb is "open" or burned out. The filiment for the tail light portion will still work.
trying to install bulb in 2007 maxima need info on how to
1157 or 1077.
You will need a new central mounted brake light bulb for your vehicle. Changing it is very easy. You just need to pull the old one out and push the new one in.
Replace the bulb it works when you turn on the driving lights and when you brake. there are two little springs inside the light one is for the brake light and the other is for the driving light. All you need to do is replace the bulb. good luck.