Wood water sealant or a good coat of paint that fills all the cracks. Don't forget to caulk the edges to keep water from running into the walls.
Waterproofing may not protect again serious spills or overflows but could minimize ceiling damage on the first floor after a small leak.
It isn't regular nylon which is put on a tarpaulin to make it waterproof. It is a substance called silnylon, which is a blend of nylon and silicon which is used for waterproofing.
Yes they are.
you use a strong material like wood and then put the tin foil over it, so it is waterproof because if you did not put a waterproof material on it would absorb the water and sink.
How much? what kind of plywood floor? Why do you need to do this??
It is put behind a fireplace as a precaution, like waterproof sheetrock in bathrooms.
yes
Cashmere is not waterproof but you can put on a special fabric finish that can make it waterproof.
You get the second floor by talking to the owner and workers in the chatting section ALOT! And you will gradually unlock the 2 floor cages which will unlock the pannels to put in the second floors
There is a seesaw to your right and a trash can. Put the trash can on the left side of the seesaw and jump on the other side. The trash can will take a while to get up there. When you get it up there push it to the window and you are on the second floor.
waterproof is when you can put water on it nothing is going to happen
There are two methods to waterproof your floor. One is to apply a waterproof membrane prior to putting tile or carpet. Dal Tile offers a great product made by Laticrete. The second is to apply a waterproof flooring material. The current trend is urethane / epoxy quartz broadcast flooring systems. A substrate of urethane or epoxy based material is put on the floor. Then a sand mixture is broadcast over the urethane /epoxy and rolled with a paint roller to embed the sand into the urethane / epoxy. After that has dried, a urethane clear top coat is applied. The resulting texture on the floor will depend on the amount of sand used and how many topcoats of urethane. I wouldn't advise this for a do it yourselfer. It's messy messy. You should be able to get it professionally done for less than $10 a square foot.
First you have to add a staircase. then you must press the "move up floor" button then put a wall around the second floor on top of the first floor wall. then you place in floor tile. You might have to put in floor tile before the wall. You can always change the kind of floor tile later. I hope i helped.
It isn't regular nylon which is put on a tarpaulin to make it waterproof. It is a substance called silnylon, which is a blend of nylon and silicon which is used for waterproofing.
you laminate it (put plastic around it ) OR you can wax it!
Yes put them in a plastic bag.
You can add a new story to your home once the story below it is complete. You can't make a second floor until you have all of your rooms on the first floor. Stairs are jsut to look cool in your house, but they don't change whether you have another floor or not in Millsberry. You can purchase new rooms at Pete's Hardware/Construction Store Downtown by clicking on the "Add A Room" section on the top of the page. You then can choose where you want to put your room (and the type of room) or yard. Yards can go anywhere on the first floor, but you cannot build on top of them on another floor. Rooms can go in the middle nine squares. You can add floors once you've filled all the room squares on a previous floor. Rooms cost $2500 MB each. Update: Millsberry has now been shut down.
You can add a new story to your home once the story below it is complete.You can't make a second floor until you have all of your rooms on the first floor. Stairs are jsut to look cool in your house, but they don't change whether you have another floor or not in Millsberry. You can purchase new rooms at Pete's Hardware/Construction Store Downtown by clicking on the "Add A Room" section on the top of the page. You then can choose where you want to put your room (and the type of room) or yard. Yards can go anywhere on the first floor, but you cannot build on top of them on another floor. Rooms can go in the middle nine squares. You can add floors once you've filled all the room squares on a previous floor. Rooms cost $2500 MB each.