0
Chocolate ;)
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What car is this of 4 stud 3inch stud pattern 74mm centre bore 4 j wheel?
check lugnutpatterns.com
What car uses a 5 x 5.5 bolt pattern?
There are a lot, assorted suv's dodge trucks/suvs Suzuki suv's Kia suv's other concerns are the stud size and the hub center bore size and offset. roadkillcustoms.com has a chart that will give you the yr/make/model/stud dia./ hub and offset.
Can you fit some Toyota MR2 2004 wheels onto your Toyota MR2 2000 car?
Yes, the mr2 mk3 wheels fit all years 2000 to 2007. They will not fit the mk2 model which has a 4 stud pattern rather than the mk3 5 stud pattern.
Can you put front wheel drive wheels on a rear wheel drive car?
if it has the same stud pattern yes. hope this helpsYes, as long as they fit.
How do you measure the stud pattern on a car?
What your after is how far apart the studs are apart,? generally 100mm or 114.3mm(4.5inches) its simply just how spaced out the 'circle' that the studs sit on.If the stud pattern is a 4 x 120 it means it has four studs (holes) on a 120mm PCD (pitch circle diameter, circle that the holes are equally spaced on). If you measure the greatest distance apart on a four or even numbered stud pattern this will give you the diameter. If measuring a 5 or odd number pattern you need to measure the distance from center of wheel to center of stud. This will give you radius then multiply by 2 to get the PCD (diameter).Example Say you had 5 studs and the radius was 62.5mm, X 2 = 125mm. Then the stud pattern would be a 5 x 125.
Can a stud dog be a stud dog after he got hit by a car?
Yes. Unless it killed him. That would make it difficult.
What cars use 5x114.3 bolt patterns?
what car uses 5x114.3 bolt pattern
How many ways are there to make a royal flush is a five car stud?
Four
How do you change a car stud?
with a hammer. u just smack it. they are pressed fit
How do you drill a stud from a car wheel?
to replace a wheel stud, depend on the type of car or truck, jack it up and block it. remove the affected wheel and use a hammer and a punch to drive out the broken stud. most automobiles have an access hole to replace studs with out removing any more components. however some do not. to install place stud in hole and use some washers and a lugnut to mount in place.
Are the axles from an Chevy Impala 5 x 5 pattern the same length and spline pattern as those used in Chevy trucks that have a 6 stud axle?
Car and truck parts are not even close to being the same as far as the drive train. Won't work.
How do you know the size of the rocker arm stud on your car?
Remove a rocker cover and measure one.
