There are numerous reasons that can cause the instrument panel to stop working. In my case, I found a pin on one of the printed circuit boards that had never been soldered. This pin supplied 12 DC power from one board to the other and was black from arcing over the years. This was an intermittent problem that would cause the entire panel to come and go. I soldered the pin and the instrument cluster has been working flawlessly ever since. Bad grounds are often the cause for electrical problems in Corvettes.
instrument panel,or guage cluster
it is located behind instrument panel on top of radio.
Below Right side of instrument panel
It's the 15 amp CTSY/CLK fuse on the fuse panel. The fuse panel is located on the right side of the instrument panel. Open the passenger door and you will see it.
== ==
ABS = Anti-lock Braking System ASR = Acceleration Slip Regulation
No. The 91 Corvette has a larger roof panel than the 88 Corvette's. yes if you change the front anchoring brackets
Check parking light fuse - should be the same circuit
Look under the instrument panel on the driver side. I had to get up in and look to the left of the steering column.I'm trying to locate a diagram of what the fuse panel has in it. I have a haynes and chiltons and owners manual, but nothing that shows which spot is for what fuse. the etchings on the fuse panel itself appear to be too well worn to see what they were originally labeled as.good luck1979 Corvette?
This is cluster failure! The instrument cluster will need to be replaced this is usually done by certified Mercedes repair facility
Yes
you take apart the dash and get to the instrument panel. then you take the instrument panel out and on the back of the panel you'll will see the lights