Want this question answered?
Sometimes the Steering wheel lock will rest on the locking mechanism and not let you turn the ignition switch. Try turning the wheel one way or the other to relieve the pressure while tuning the ignition switch. If this does not work then you may either have a worn out ignition swtch, Key, or there is a mechanical failure of the switch.
Ignition switch. Not the lock, the column mounted ignition switch.
The KILL switch is in series with the ignition switch. When the KILL switch is open, the bike will not start.
Check your neutral safety switch on the transmission. It is either loose or out by a hair, that is why it work only some times.
check your ignition switch.
Blown fuse? bad ignition switch?
1. A fuse blown in the tail light circuit. 2.A fused bulb. 3.fault in the ignition/tail light switch.
The ignition switch is bad. Replace it.
switch ignition on press lock button for 10 secs switch ignition off leave for 5 secs your remote should be coded
Fuse, flasher, switch, bulbs, wires, ignition not on, dead battery,Fuse, flasher, switch, bulbs, wires, ignition not on, dead battery,
i would change the electrical part of your ignition switch- i would change the electrical part of your ignition switch-
what is an ignition actuator i work on Chevrolet and have never heard of it are you talking about the switch