Want this question answered?
how to replace a water pump on a 1991 acura legend
diagram of where the water pump is located on 1994 acura legend v6 diagram of where the water pump is located on 1994 acura legend v6
in front of engine must remove the timing belt covers
oxygen sensor
The water pump on a 94 Acura Integra is located on the front of the engine. It uses the power of the engine to circulate hot water from the engine to the radiator to cool it.
If it is coolant, a leaky heater core. If it is water, a clogged ac drain or damaged door gasket.
Other than an obvious external leak that you can easily see, you may have a blown head gasket.
Blown head gasket or cracked head.
Explain what it is doing! is water coming out of the tail pipe? do you see white smoke coming out of the tail pipe?
The water pump on a 1994 Acura Integra is replaced by removing the engine accessories, pulling the radiator hoses, and taking out the retaining bolts. The pump can then be pulled from the engine block, the surface cleaned, and a new pump put in case.
The most common cause of overheating is a thermostat stuck in the closed position. However, other causes are: faulty water pump, clogged radiator, clogged hose(s), coolant leak or a broken drive belt. I had a 1987 legend with around 160K that was overheating. Antifreeze would boil out of the overflow. I changed my radiator and it fixed the problem.
when your engine is hot it causes the water to boil and the water and the anti freeze will come out of the overflow pipe.