The two most usual problems are 1- one or both of your front hubs are either bad or not engaged in the lock position. 2- check to see if you are getting power from your front driveshaft when the truck is in either 4 HI or 4 LOW. If both of these are good it is possible that you have a problem in your front differential or your transfer case.
how do you change front ring and pinion on 89 Toyota pickup
No, the frames are different. In 1986 Toyota went from a solid front axle design to independent front suspension. Therefore the frames are different.
changing front brake pads on 1991 Toyota truck
The horn on a 1984 Toyota pickup is located in the undercarriage near the front pumper. It is on the passenger side of the vehicle.
You have sticky front calipers.
4" in front dash
Ussually it's the ball joints and it's ussually only on one side of the vehicle. Most noticable when turning the wheels.
54mm
The Dodge Dakota pickup truck has CV joints on both front wheels. The pickup truck also has a driveshaft, as it is rear wheel drive.
Yes. It's located in front of the catalytic convertor.
Wheels require balancing.
Rear, since they are the Drive Wheels when using Two-Whee Drive.