E series
A class D network is reserved for multi-casting. The class E series of network addresses are reserved for experimental purposes. 240 - 255 are reserved for class E addresses.
Class A(government) and E are reserved for special purposes.
Class C
Class D and E are reserved for special purposes. A Class D is 1110 the decimal range will be 224-239. Class E is reserved for InterNIC experiments.
17
You can't use this because this is a class E network. It's reserved and it's not being used for anything.
254 - a class C subnet uses 8 bits for the hosts and 0 and 255 are reserved.
16 384 networks are available in Class B network.
A class A address is one of the IPv4 class-full networks. There are 3 of these class-full networks in IPv4; class (A, B, and C). The entire IPv4 address range is 32 bits long. The address range is broken up into 4 x (8 bits) referred to as octets, and then giving the whole 32 bit address range. The classes are defined as follows… Class A = reserve the first octet, or 8 bits for network addresses and leave the remaining three for host addresses. Reserving the addresses for the network is also referred to as the network mask. In other words do not assign any address in the reserved, first octet, to a host. Class A = 11111111.00000000.00000000.00000000 also known as a /8 bits reserved for net Class B = 11111111.11111111.00000000.00000000 also known as a /16 bits reserved for net Class C = 11111111.11111111.11111111.00000000 also known as a /24 bits reserved for net So the answer is; a class A network has an 8 bit field for the network, and a 24 bit field for the host
Usually reserved for used electronics.
0.0.0.0 --> Current network (only valid as source address) 10.x.x.x --> Private address space for class A networks 14.x.x.x --> Public data network 127.0.0.1 --> Loopback (refers to own computer) 128.0.0.x --> Reserved (IANA) 169.254.0.x --> Zeroconf network 172.16.x.x through 172.31.x.x --> Private address space for class B networks 191.255.0.x --> Reserved (IANA) 192.0.0.x --> Reserved (IANA) 192.88.99.0 --> IPv6 to IPv4 relay 192.168.x.x --> Private address space for class C networks 198.18.0.0 --> Benchmark tests 223.255.255.0 --> Reserved (IANA) 224.0.0.x --> Multicasting 240.0.0.x --> Reserved 255.255.255.255 --> Broadcast I think I've got that right.
LOOPBACK ADDRESS - 127.0.0.0\8 IP Network range is reserved for Internal Testing.