0
It depends on what look you are going for. A white or beige grout would provide a nice contrast. Black or dark gray also looks nice if you prefer a more solid color look.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Can you use wall tile grout on floor tiles?
You can. It is less gritty but it works. Edit - While this is true, it's important to understand the wall grout is designed for thinner grout lines, so if you use it on the floor, make sure your grout lines are thin. Otherwise, the grout will crack.
Can you use White grout to install porcelain tile?
Not JUST a grout no. You can get a cement that will also work as a grout but a pure grout would not have the adhesion required to stick the tiles to the wall properly, you should not use it as a cement.
Can you use wall tile grout on floors?
Tiles used on floors tend to be thicker than wall tiles. Also, floor tiles are subjected to flexing as people walk over them. Therefore, if floor tiling a wooden floor, use a flexible cement adhesive and grout designed to give and take without cracking.
Which goes first ceramic floor or wall?
You can do it either way, however, you'll find grouting and cleanup easier if you do the walls first, including grout, before you start on the floors. This eliminates any mess from wall mortar or grout falling on your new tile floor. It also eliminates any risk of breaking floor tiles if you drop wall tiles on the floor.
Wall Tiles?
form_title= Wall Tiles form_header= Give your home a unique feel with wall tiles! What size tiles do you need?*= _ [50] Where will the tiles be installed?*= _ [50] What color do you want the tiles?*= _ [50]
Should you install ceramic floor or wall tiles first?
Having tiles untold bathrooms I always do the floor LAST this saves dropping tiles etc on to the nice new expensive tile. However, when tiling the walls first leave out the bottom row of wall tile (here you can place your straight edge datum, put in the floor tile then set that last row of wall tile and leave a 1/8" gap between the floor and wall tiles and fill with same water proof grout as the floor tiles have
What are some causes for water to seep up through the grout in between tiles on a tiled floor?
Water seeping up through the grout in between tiles on a tiled floor can be caused by several factors, including: Cracked Grout: If the grout between the tiles is cracked, water can seep through the cracks and reach the subfloor. Loose or Damaged Tiles: Tiles that are loose or damaged can allow water to seep through the gaps and reach the subfloor. Poorly Installed Tiles: If tiles were not installed correctly, with inadequate adhesive or a poorly leveled surface, water can seep through the gaps and reach the subfloor. High Water Table: If the area where the tiled floor is installed has a high water table, water can seep up through the grout. Plumbing Issues: A leak in the plumbing system, such as a damaged pipe or loose fitting, can cause water to seep up through the grout. Flooding: If the area where the tiled floor is installed experiences flooding, water can seep up through the grout and reach the subfloor.
Stone Tile Repair?
form_title=Stone Tile Repair form_header=9993 What is the location of the tile? (Select all that apply)*= [] Countertop [] Backsplash [] Floor [] Wall [] Stairs [] Fireplace [] Swimming Pool [] Other Are there any spare tiles left over from the installation?*= () Yes () No How would you describe the nature of the damage? (select all that apply)*= [] Cracked [] Scratched [] Chipped [] Loose [] Worn [] Discolored/Stained [] Dull/Hazy [] Need cleaned [] Need polished/sealed [] Grout discoloration [] Grout damaged or gone [] Grout has mold/mildew [] Grout needs cleaned [] Grout needs sealed [] Want to change grout color [] Other
What would cause the inside wall in a tile shower to become wet if there is no plumbing in this wall?
AnswerIf there is no plumbing in the wall it has to be either a leak from upstairs that's running down the wall or the grout or caulk has gone bad and every time you take a shower you make it worse. Grout is cheap and easy. Try scraping out the old grout between the tiles and then regrout between them to seal them. If any tiles fall off when you scrape out the old grout, that means the tile cement as well as the grout or caulk has gone bad. In that case you would have to scrape away all the old tile cement as well as the grout or caulk. Let the wall dry out really well for a few days - a week would be better. Then re-fix the tiles with new tile cement and re-grout between the tiles to seal them.AnswerI the tile is set onto wallboard - including greenboard, the wall will act as a sponge and self destruct. You may end up needed to tear it out and start over. It could be because the tiles were set on regular all purpose drywall without any durarock and moisture repelling drywall and without moisture repelling adhesive-- and so the water seeps through the sand-grout and wets the all purpose drywall causing it to loosen and fall after some time. Honest Contractors are found when you can talk their language.If you can speak to them like you know what you're talking about they will be less likely to take advantage of your're intelligence. I myself use a vinyl adhesive which plasticizes and does not absorb water like the sandgrout that many contractors try to get away with using-- I only use sand grout to fill my seems -- not to mount the tile on the wall,-- and I make sure I trowel vertically to ensure that seepage water does not catch and build up on any ridges behind the tile. When you trowel horizontally you create ridges and give seem seepage water a chance to settle on the troweled adhesive ridges which eventually soak through the drywall and loosen its integrity.
Can you stick ceramic wall tiles on to ceamic wall tiles?
No, the adhesive won't hold.
Bathroom Wall Tiles ?
form_title= Bathroom Wall Tiles form_header= Install or repair bathroom wall tiles in your home! What color tiles do you want to install?*= _ [50] Do you want to repair current tiles?*= _ [50] What is your budget for bathroom tiles?*= _ [50]
How do you tile a bathroom?
To tile a bathroom, you must first find the center of the floor or wall. This is where you will lay your first tile. You work out from there. This way you have the cuts where they are less noticeable. Use a trowel to place tile glue on the tiles, put them in place. Use spacers to keep them apart at an equal distance. Use a tile cutter to cut tiles in areas where a whole tile is not needed. Once you are done, remove the spacers and use a trowel to grout between the tiles. Wipe away excess grout with a wet sponge.
