0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Where is the speed pulse wire on a 2008 Ford Mondeo?
To obtain a speed pulse you would require a CanBus Unit and connect it to the correct can wires. Usualy the OBD 2 socket. Pins 14(can low) and 6(can high). :)
2008 Camry speed wire color code?
Speed wire color code of Toyota 2008 Camry
Speedo pulse wire?
A speed pulse wire might refer to the speedometer pulse wire that accepts pulse signals in order to display speed. This wire is generally a two wire sender unit that comes pre-calibrated to the vehicle.Ê
How do you disable a factory alarm for a Nissan Xterra 2000?
You need to send a single pulse on the unlock wire. I forget what color it is. Xs need a double pulse to unlock.
What color wire code and starter wire?
What colorstarter wire , forMercedes Benz form 2006 throw 2008
Where is the speed pulse wire in a Toyota Corolla?
where is the speed pulse wire in a Toyota corolla
The tach signal output wire color on a 2008 Scion xb?
The tachometer signal output wire in a 2008 Scion XB should be violet/white. In the manual this wire will always be number 5.
95 Ford F-150 losing injector pulse?
Injector pulse is controlled by the ECU. Injectors Have a red wire that is hot. Black wire is controled by computer ground...
Is the striped color on wire the actual color of the wire?
No, example- If the wire is blue with a white strip, (which is your remote wire for the amp turn-on) the wire is blue, the strip is not the color.
How do you wake up a gem module?
Pulse the door trigger right before unlock, or set up for double pulse unlock, and diode isolate the door unlock wire from the door trigger wire.
When Tim pushes the wire between the poles of the magnet the galvanometer registers a pulse When he lifts the wire another pulse is registered How do the pulses differ?
The pulses differ because the two pulses are in opposite directions.
Where is the Speed pulse wire on a octavia 2009?
The speed pulse wire on a 2009 octavia is pin number 9 on the multi plug connecter on the back of the speedo cluster , remove plug and all the pins are numbered .
