0
What colortype of coolant should you fill your radiator with after a radiator flush for your 1995 Toyota Corolla?
Wiki User
∙ 17y ago
buy the universal fluid at your local automotive store.
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
Where is the coolant on a Toyota Corolla?
in the radiator, some in the engine and some in the reservoir
How to do a coolant change on a Toyota Corolla?
To change coolant on a Toyota Corolla, place a bucket under the radiator. Open the radiator drain valve and remove the radiator cap. When all antifreeze drains out, close the drain valve. Then refill with fresh antifreeze and replace the radiator cap.
How much radiator coolant does a 2004 Toyota corolla le need?
A little over 4 quarts or 1 gallon
How much engine coolant does a 2000 Toyota Corolla hold?
how much engine coolant dosee a 2000 toyota corolla hold
Where is the coolant temperature sensor on 1999 Toyota Corolla?
where is coolant tempreture senser in 1999 corolla
Where is the radiator petcock on 2006 Toyota Corolla?
bottom of radiator
Does the thermostat connect to the bottom radiator hose on a 1996 Toyota corolla?
The thermostat connects to the top radiator hose on a 1996 Toyota Corolla. The bottom radiator hose connects to the water pump.
How do you flush a 1994 Toyota Corolla radiator?
asdasfasd
What type of coolant goes into a 1999 Toyota Corolla?
Your 1999 Toyota Corolla can use any SAE certified anti-freeze coolant. The anti-freeze coolant can be mixed half-and-half with water.
What to do when radiator fluid leaks out in 1985 Toyota corolla?
repair the leak
Where is the thermostat in a 1996 Toyota Corolla dx?
The thermostat in a 1996 Toyota Corolla DX is located in the top radiator hose. It is in the end that is closest to the engine.
How do you put coolant in Toyota Corolla VVTi 2002?
In order to keep a Toyota Corolla in optimum working condition, you must perform routine maintenance. A good example is the flushing of the radiator. If you neglect this task, debris can accumulate in the coolant system causing the car to overheat. To flush the radiator, you don't need to be a certified mechanic, just follow a few directions. 1 Move the Toyota Corolla to a flat surface and set the parking brake.2 Pop the hood and check the external temperature of the radiator. If the radiator is cool to the touch, then continue to the next step. If not, wait until it is cools off before proceeding.3 Turn the radiator cap one full rotation to release any pressure inside the radiator. Wait a few seconds and then remove the radiator. Position a bucket underneath the radiator directly beneath the drain plug or petcock valve.4 Open the drain plug and allow the existing coolant to drain completely from the Toyota Corolla's radiator and into the bucket. Pour the old coolant into a sealable container, because it very toxic to people and pets. Dispose of the coolant at a liquid waste recycling center or your local auto repair shop.5 Place the bucket back underneath the radiator, close the drain plug and fill the radiator with distilled water. After a few minutes, open the drain to allow the water to flow into the bucket. Replicate this process until the flush water is free of debris. You need about 3 gallons of distilled water to flush the radiator properly.6 Close the drain plug and fill the radiator with fresh coolant. Then, start the Toyota Corolla and turn the heating fan to high. Allow the car to run until the cooling fan kicks on and off twice.7 Switch off the engine and check the coolant level. If it went down, add more fresh coolant. If it didn't, put the radiator cap back on and close the hood.
