I've never had problems with the freeze plugs but I have had to put 3 water pumps on my 91. That has always caused a, "bad water leak." Sometimes comes out from under the pulley and sometimes comes out from under the pump gasket. The pump/gasket is about 12 inches across and 6 inches tall.
The bell housing is between the engine and the transmission.
between the transmission and the transmission housing
The bell housing surrounds the clutch assembly. Mounted between the engine and the transmission.
On the back of the engine, mounted between the engine and transmission, inside the bell housing. You cannot see the flywheel. The starter is connected to the flywheel when you start the engine.On the back of the engine, mounted between the engine and transmission, inside the bell housing. You cannot see the flywheel. The starter is connected to the flywheel when you start the engine.
airfilter housing 1998
The transmission housing for a 1991 E350 is bolted to the rear of the engine. The entire transmission case is considered the housing.
The bell housing is the front of the transmission, the end that bolts to the engine.The bell housing is the front of the transmission, the end that bolts to the engine.
Usually at engine end of upper radiator hose in housing
It is located between the back of the engine and the transmission. It houses the flywheel and clutch if it is a standard or the flex plate and the torque converter if it is an automatic transmission.
It is the area between the engine and transmission.
Mounted between the engine and the transmission. It houses the clutch/pressure plate on a manual transmission or the torque converter on an automatic transmission.
The bell housing is the front of the transmission ( the larger diameter portion ) where the transmission is bolted to the engine