One thing that could stop a blower motor from working correctly in a 2010 Ford Fusion is a blown fuse. Another thing that might be stopping the blower from working is a broken fan.
Could have just overheated
Could be, a blown fuse, a bad blower motor, a burned out blower motor speed resistor, a bad blower motor switch,
Could be, Blown fuse, Bad blower motor, Bad blower motor speed resistor, Bad blower switch,
Check to see if you are getting power to blower motor - if so replace blower motor If not check fuse, switch, resistor pack.
can be the heater blower motor resistor located in either the ductwork or under hood near blower motor on firewall
Check all the fuses and relays first. If they all appear to be in good working order, then you'll have to get to the blower motor. Could be a short or the motor could be bad.
Check for blown fuse Check to see if you are getting power to blower -- if so could be bad blower motor Bad resistor pack?
Blower motor fuse is blown. Blower motor resistor burned out. Blower motor switch bad. Blower motor bad.
Depends on the year. You could try the resistor first since it is the cheapest. If not that, then check the fuses, relays and wiring to the control head. Then lastly, change the motor.
the switch, or the blower motor resistor, or blower motor usually it the last two at one time
Blower motor NG. Blower motor resister NG. Blower motor fuse NG. Blower motor switch NG.
it's the blower motor