condenser
2 kpa
Reid vapor pressure (RVP) of gasoline is the vapor pressure at 100°F.
Use the Equation of State (EOS) in combination with the Antoine's Equation to determine vapor pressure.
Anti sweat insulation means to prevent condensation of atmospheric water vapour on the surface of pipe is called anti sweat insulation.
THE NORMAL CONDITIONS THE COLOUR OF lpg VAPOUR LINE IS GOLDEN YELLOW. BUT THERE IS MANY LINES FOR DIFRENT GASES YOU CAN CHANGE IT & COAD SAPERAT TO SIGN .
In vapour compressor refrigeration system the low pressure and temperature vapour refrigerant from evaporator is compressed. where it is compressed to a high pressure and temperature. From compressor refrigerant goes to condenser where where it changes the phase. from condenser refrigerant goes to evaporator through expansion device.
how to calculate the vapour absorption mechine efficiency and per TR steam consumption
It is a refrigeration unit based on Vapour Absorption Refrigeration Cycle (typically refrigerants used are Water or Ammonia).
what happens if vacuum is 10 mm hg in vapour absorption mechine
in orde to reduce the pressure........cming from the evaporator
Suction superheat is the heat added to the refrigerant above that required to change its state from liquid to vapour (as happens in the evaporator). This heat is added both in the evaporator, in the suction line and (where applicable) in the suction accumulator.Discharge superheat is suction superheat plus heat of compression, and must be removed in the condenser before condensation, the change of state from vapour to liquid, can occur.The HVAC Veteran
in orde to reduce the pressure........cming from the evaporator
In a gross sense, the water vapour in clouds is has the greatest effect.
usually the refrigerant you have pumped out of the system is contaminated (either liquid/air) contaminated refrigerant is less efficiant and will lead to a short system life. refrigerant is works kind of like the rain in a water cycle. The system starts at the compresser (the heart of the system) pushing refrigerant in to the condenser (like condensation in the clouds) condensing to a liquid and heads toward the metering device (raining) The metering devise rapidly lowers the pressure of the system into the evaporator (get the picture already?) where the refrigerant collects the heat in the refrigerated space and boils into a vapour releasing it to out side the refrigerated space. obviously there is more detail then this but thats the basic operation.
because of flash gas the amount of liquid entering the evaporator would be 75 % liquid and 25% vapour
When white light from mercury vapour lamp is passed through sodium vapour then we have as outcome a continuous spectrum of colours with two black lines in the yellow-orange region. These two lines stand for the absorption of 5890 A and 5896 A lines of sodium atom Another example is Fraunhofer lines seen in the continuous spectrum got from sun. These lines are due to absorption of characteristic frequencies of metals present in the chromosphere of the sun
There are two basic cycles of Airconditioning/Refrigeration 1. Vapour compression cycle, 2. Vapour Absorption Cycle Vapour compression cycle is used in most of the airconditioning applications but ofenly vapour absorption is used. evaporator, compressor, throateling valve, tank & condensor are the major parts of this cycle.