To measure resistance, you could use an ohmmeter. But ohmmeters are not particularly accurate, so other methods are preferable. These include the use of Wheatstone's Bridge (which compares the unknown resistance with known values) or a Ducter (for very low resistances).
Resistance is measured in ohms (Ω) and 1Ω equals 1V per ampere.
Measure the distance from the fulcrum to the resistance
An multimeter usually. Set on ohms, which is the unit of electrical resistance.
You can use a multi-meter to measure resistance. The specific portion of the meter for measuring resistance is called an ohmmeter.
It is dc resistance, use to measure the rated current at primary and secondary side
You have to measure the voltage, and the current. The resistance is then calculated by using Ohm's Law.
Semiconductor resistance depends on temperature. So, you can use a shunt resistor to measure semiconductor voltage with a given current and, then, obtain temperature.
Wheatstone bridge is used to calculate the resistance of unknown resistor in the circuit.
You can use a multi-meter to measure resistance. The specific portion of the meter for measuring resistance is called an ohmmeter.
Avo meter
Resistance doesn't "use" either. Resistance is the division of voltage by current. It can be though of as a measure of how hard it is to push electrons through a substance.
The use of a resistance box or a "Decade Box" is to help calibrate instruments used to measure electrical values such as Voltage, Current, and Resistance. Without them you would not have a known value of resistance to use as a set point.
You use an ohmeter. It sends current through the wire to determine value.
Your measure resistance in OHMS ΩOhms.
A: NO the only way is to lift one lead and measure.
You can use a LCR (Inductance, Capacitance, Resistance) meter if you can find one.
platinum resistance thermometer
we can measure the resistance of the motor by using voltmeter ammeter method of by directly using a multimeter across the armature terminals of the motor in voltmeter ammeter method we should use a less value of dc voltage to find the resistance
To accurately measure very small resistances, you could use a Wheatstone Bridge.
The ohmmeter is usually used to measure the resistance of a given wire only.