0
What do you call the part behind the rotor on a 2003 mustang behind the rotors. My mustang was on a jack when the jack dropped and the part was bent. I need to replace it but don't know what it is.?
Wiki User
∙ 15y ago
i think you are refering to the dust shield.. a thin piece of metal in a semi circular pattern directly behind the rotor and a little bigger diameter than the rotor.. this would be an easy piece to bend
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Where are the front brake rotors on a vehicle?
You will find that the front brake rotors are located behind the front of your wheel spindle, (behind your wheel and brakes). There you will see the rotors.
How do you replace the front rotors on a Toyota Land Cruiser?
how do you replace the front rotors on Toyota Land Cruiser
Minimum rear brake rotor thickness for a 1994 mustang cobra?
The minimum thickness on the front rotors for a 1994 Mustang Cobra?æis .97 inches. The minimum thickness on the rear rotors is .50 inches.?æ
Do you have to replace the brake pads when you replace the front rotors?
no but it is recomended.
How do you replace front rotors on a 2008 Honda accord?
pull off the front wheels. remove the calipers. remove the two screws that hold on the rotors. replace the rotors and reverse the procedure.
Do you need to replace the brake pads if you are replacing the rotors?
depends on the condition od the pads. If worn or have groves etc from the rotors then replace.
How much will it cost to replace brake pads and rotors on a Honda CRV?
how much does it cost to replace brakes rotors on honda crv
How do you replace front rotors on a 2002 acura 3.2TL?
can you cut the rotors on a 2002 acura
How do you replace rotors 2001 mustang?
Should be of the "peel off" type Remove wheels Remove caliper mounting bolts Slide caliper off rotor Rotor should slide off hub
Is it possible to replace one's own brake rotors?
If you are wondering whether it is possible to replace one's own brake rotors or not because you drive an older vehicle that need brake rotors replaced, then the answer is no.
Do you need to replace rotors if the pads still have surfacing left?
You replace rotors when they get too thin, or are warped. They may be to thin to be turned and still alright to use. Rotors do not "have to" be turned to put new pads on.
How do you replaace the rotors from a 2002 Xterra?
2003 Nissan xterra supercharged replace front rotors
