Drain some out. It is bad to have too much oil.
24 oz is what most take do not over fill or it will bust your seal
If you change the filter, you will need 4 quarts; however it may only take 3 &1/2 to fill. DO NOT ever over fill.
im not sure about a 2006 mine is a 2007 it takes only 3.6 qt do not over fill you will be in alot of trouble
On the primary there is a round (derby) cover. Remove the cover, fill until the oil tries to run out. Replace the cover. We use engine oil in our primaries.
Whatever it takes to fill to the bottom of the clutch basket.
remove the round derby cover from the primary. fill until the oil tries to run out. replace the cover.
in the top of the engine there is a cap with an oil can sign on it . Fill the oil in there. Be care not to over fill as it can cause the engine to cease!
Sunoco, makes Harley Davidson engine oil
where is the oil drain on a 2002 harley softtail
Let engine cool. Remove dipstick/fill plug. Remove oil filter. Remove drain plug (underside of bike).
The fluids I E oil is filled in the oil bag, DO NOT OVER FILL. The primary is filled by removal of the derby cover (the large cover on the side of the primary) and is filled only to the lowest point of the opening. I suggest finding out what fluid was used in the primary, I suggest using type F ATF trans fluid.
3 1/2 quarts will fill it run bike around block check oil again top off if necessary