Nothing all one has to do is look at the many installations of steel pipe and brass valves
The 1943 Lincoln cent is zinc coated steel not nickel and copper.
If you are asking if there will be a chemical rection between the copper and steel, such as an explosion, no. Metals have a property called nobility, which measure a metals resistance to corrosion when in contact with another metal. The further apart they are on the nobility scale, the worse the corrosion. Copper and stainless steel are not very far apart. Copper and aluminum are a poor mix. The Galvanic Scale should be checked to see if certain metals in contact will accelerate corrosion.
copper is cheaper to manufacture and easier to bend then steel
mild steel
steel is an alloy of iron and about 0.1%-0.3% carbon. bronze is an alloy of copper+ tin....( not steel)
The 1943 Lincoln cent is zinc coated steel not nickel and copper.
IF THE COPPER SULFATE DISSOLVES IN WATER, HAS A BLUE COLOR. WHEN STEEL WOOL IS MIXED WITH COPPER SULFATE,, THE STEEL WOOL DISSAPEARS, A BROWNISH SOLID FORMS, AND THE COLOR OF THE SOLUTION CHANGES FROM BLUE TO GREEN.Copper is produced.
Mild steel, not copper.
You cannot solder Steel BUT you can braze steel and copper and you can thread steel and then use a copper x female adapter Or finf a steel fitting and use a C x M adapter
Steel and copper are both metals, but copper is the best conductor.
Steel and copper - however, the flame on her torch is covered in gold leaf.
Copper is deposed on the steel wool.
Fe + CuSO4 -> FeSo4 + Cu it's a single replacement reaction The steel wool becomes copper plated.
Copper is an element.Steel is a alloy.
Copper is much more expensive than most steel.
zinc/steel zinc/copper copper/steel
If you are asking if there will be a chemical rection between the copper and steel, such as an explosion, no. Metals have a property called nobility, which measure a metals resistance to corrosion when in contact with another metal. The further apart they are on the nobility scale, the worse the corrosion. Copper and stainless steel are not very far apart. Copper and aluminum are a poor mix. The Galvanic Scale should be checked to see if certain metals in contact will accelerate corrosion.