recently replaced my head lamp on my 98 Suburban, pretty easy, disconnect battery, remove bolts securing front grille, remove grille and you should have planty of room to reomove and replace the head lamp. Hopefully this will help out. If you have composite headlamps, don't bother removing the grill. There are two retaining screws visible under the hood above each light, Very long , normally silver. Remove both screws and pull the headlight assembly THRU the grill. Replace bulb and reverse. Reseating the assembly might take a little patience. DON'T OVER-TIGHTEN THE RETAINING SCREWS.
Call Mr. Goodwrench!
it is 45,ooo
1988 - 1998
Begin by removing the wiring harness from your 1998 Chevrolet Suburban ignition module. Remove the ignition module retaining screws. Reverse the process to install your new ignition module.
Yes
A 1998 Chevy Suburban 4x4 uses 5 lugnuts. Each are positioned 5 inches apart along inner edge of each wheel.
how do i remove an antenna to a 1998 chevy express 1500 van
OK I HAVE A bolt in the center where is the tool to remove it
enough to keep it from freezing.
5.7L 350 Vortec engine.
1998 holds 44 gallons
You will need to remove the 1998 Chevy Camaro brake light wiring harness. Remove the brake light retaining screws. Reverse the process to install the new brake light.