The duration in degrees when contacts are closed.
30 degrees Dwell angle varies from vehicle to vehicle. The dwell angle is the amount of degrees the points are closed
12-16 thou gap and 34-36degree dwell angle for HR.
The meter needs a dwell setting or scale. Otherwise it won't measure it with meaningful readings.
no.
Dwell is the angle at which the spark occurs in the cylinder before the piston reaches top dead center.
Dwell is the angle at which the spark occurs in the cylinder before the piston reaches top dead center.
ANSWER: Having a too small dwell angle can lead to issues in the performance of a system that uses it. A dwell angle refers to the amount of time that a fuel injector or spark plug remains open during an engine's combustion cycle. If the dwell angle is too small, it can result in insufficient fuel or spark being delivered to the engine, which can lead to poor performance, such as misfires or a lack of power. Additionally, a too small dwell angle can also cause increased wear on engine components and can lead to higher emissions. It is important to have the correct dwell angle for optimal performance and longevity of the engine.
22 degrees
With a dwell meter you could monitor the dwell angle. If the dwell fluctuates the distributor shaft and bushings are probably worn out. The dwell should be between 28 and 32 degrees and not fluctuate.
28-32 degrees.
Dwell angle is simply the amount of time the points or electronic ignition components are in a closed state to charge the primary side of the ignition coil for firing of the spark plug.. This time is expressed in distibutor rotation, hence the degrees..
Well the dwell angle is the number of degrees of rotation from the cam (during which the points are closed) During each rotation of the cam, the points must open and close once for each cylinder. Hope this helps x