I use a utility knife to strip the outer insulator off the wire and then I use a wire stripper to strip the insulator off individual wires. I cut the wire with lineman's pairs.
strippers and cutters
a wirecutter
Grinder
speaker is black-, blue with brownish stripe + on power connector their are 4 wires ,2 of them are black,1 green,last is black with green stripe
blue with yellow stripe
Magnetic stripe technology
There are the wires that control the lights on the truck. And there are the wires that go to the trailer tow package. Left turn & stop on the tow pack wires - yellow Right turn & stop on the tow pack wires - green Left turn & stop for vehicle lights - green with a orange stripe Right turn & stop for vehicle lights - orange with a blue stripe There is a secondary fuse panel under the hood that controls the tow pack wires only.
1979 ford f150 there are 3 wires for the alternator one is black with red stripe one is red and the other is white which one goes where?"
I broke open the unit and read the markings on the circuit board to figure this out. (I was tossing the DB135 in favor of a new Kenwood and needed to know how the stereo was wired. Yellow wire: Back up power (for clock/presets) Black: Ground Red: 12V source/ignition Green wires: Rear Left Grey wires: Front Right Purple wires: Right Rear White wires: Front Left Orange/White stripe: "ILL" (guessing illumination?) Blue/White stripe: Remote all speaker wires use the black striped one of same colorfor "negative"
well try to find if one wire has a darker color copper than the other, this would help. or if one side of the wire coat has a white stripe on it, then the stripe indicates it's positive
They're the black wire and the red with a blue stripe on the m.a.f. sensor. Pins 5/6.
most likely has to do with individual state & the width of the street
Stripe is a noun (a stripe) and a verb (to stripe).
The yellow with black stripe and the black wire next to it.
purple out of the 2 smaller wires black with white stripe is ground