If you charge four 50v capacitors in parallel then remove the 50v battery and hook them up to a volt meter the meter will indicate 50v.
You can use a larger capacitor (more uF) in the decoupling or smoothing parts of the circuit, but not in anything that is used to control the frequency response, but that is unlikely.
50V
It is difficult to define the value which may cause death. I think it the voltage which is dangerous. Approximately a voltage of 50V is dangerous for heart.
Vp=2 Vdc=50 r=Vrms/Vdc Vrms=Vp/1.121 so r=0.028
If you charge four 50v capacitors in parallel then remove the 50v battery and hook them up to a volt meter the meter will indicate 50v.
You can use a larger capacitor (more uF) in the decoupling or smoothing parts of the circuit, but not in anything that is used to control the frequency response, but that is unlikely.
You can use a larger capacitor (more uF) in the decoupling or smoothing parts of the circuit, but not in anything that is used to control the frequency response, but that is unlikely.
it uses about 50v
somehow
50V or larger
Yes, a 50V developer can be used to lighten hair but more than likely it will break the hair and cause irreversible damage. A 30V is recommended instead.
50V
how many protons an d neutrons are in vanadium
The voltage is lost at the slice.
Capacitors in connected in series result in a higher voltage rating, but lower capacitance. Two 470uF 50V capacitors connected in series will give you a total of 235uF, but you can put up to 100V across the series combination. Two 470uF 50V capacitors connected in parallel will give you a total of 940uF, across which you can put 50V (the voltage rating does not change for capacitors in parallel).
FOR A 24VDC it is best to install a 50v breakdown capacitor to ensure reliability