That would be traction control, it kicks in when when on slippery surfaces, in some models you can turn it onor off with a button on the shifter.
With a soldering iron?
It is behind the light switch in the instrument panel.
remove the trim panel around the instrument cluster then remove cluster. On the back of instrument cluster are the bulbs just turn them half a turn and they come right out.
It will be called and instrument fuse. It will be located in the fuse panel under the dash, drivers side.
light in instrument panel go dim can i ajust it
you cannot service panel lights on 2000 impala . you hav to replace the instrument cluster.
i have dash light problems also and my easy fix is just hitting the dash . the lights all work again after i do!
The light switch could be bad. More than likely there is a short in the instrument panel cluster or a bad ground.
Remove the instrument panel cover retaining screws. There are four screws that need to be removed. The instrument panel light bulb's will be visible. Push the light bulb in and turn at the same time to remove the light bulb.
How do you change the light bulbs in the instrument panel in 1998 Toyota corolla
there aretwo sizes for the bulb and bulb base small and large but you can replace just the bulb from the base socket. I recommend that you (url )instrument panel light bulbs or cluster panel light bulbs to find the two sizes that you will need. autolumination.com or autoanything.com or rockauto.com
There are quite a few of light bulbs on the instrument panel. You get to them from the back of the panel. Some instrument panels can be disconnected and pulled forward enough to get to the back, other panels have to be worked on "in place".