Want this question answered?
I have the same issue. I would look at the over drive sensor/module as the culprit
look online for TSB reports.. theres loads for the 87 - 95 series
Chilten's repair book or Haynes' repair book for Chrysler 95 lebaron Usuallya 95 Chrysler lebaron is 3.0L Look in the book for diagrams for 3.0L or the engine you have To find your engine Look under hood Your engine should be on top engine cover My guess is it is a3.0L
Look at the bottom or rear of the radiator
Go to your public library and look it up on ALLDATA. This is much better than Mitchell on demand. Copies are typically 15cents.
You will find it (the PVC valve) in the same place as you would on a 1995 Lebaron 3.0. I own a 1990 Chrysler lebaron 3.0 v6 and found the PVC valve in the same spot. Look up where to find the PVC valve on a 1995 lebaron 3.0 on this site. Best of luck.
no boot for 93 is 90-95 look on eBay orchrysler parts for 89 Of course it fits, without any restriction, all boots are the same from 1987 up to 1995, but Chrysler uses other part numbers!
look on the inside of cover or lid .It should have diagram .If not ,there is a diagram in owner's manaul
passengerside under the back seat . Look on the outside of the body. Not in the passenger space compartment.
The best advice is to look in a chilton's book for 1995 Chrysler lebaron 3.0L There are Chilton's and Haynes repair manuals at your local library and auto parts store
The flasher located under the steering column. It doesn't look like your usual silver flasher. It is a control modual, which looks like an ECM or a rather larger box. If you are having problems with flashers, try checking fuses.
there is a fuel pump relay in the fuse box next to battery labeled fuel pump relay on l id of fuse box.I have a 95 it should be same on 93 otherwise look in chiltons or haynes book. Chrysler does not use inertia switches. it is not a switch it is a black fuse that is fuel pump relay