Want this question answered?
It may not be possible to physically convert AC generator to DC generator. What can be done is that 'Rectifier' of suitable capacity can be connected to the out put of AC generator to get DC supply.
one is AC the other is DC
either a rectifier or a motor generator
Bridge diodes are generally used in a bridge rectifier to convert AC into DC.
Yes, if the diodes that the bridge rectifier are rated for 230V in forward and reverse voltages. Normally you can do a search for the part number on the internet and get specs there.
No. For that, you need an inverter or a generator.
Total cost to make a bridge rectifier is about Σ25. A bridge rectifier is an electrical device that converts alternating currents (AC) to direct current (DC). The process of bridge rectification is a simple one using four diodes, two AC and two DC wires, an AC source and pliers.
It may not be possible to physically convert AC generator to DC generator. What can be done is that 'Rectifier' of suitable capacity can be connected to the out put of AC generator to get DC supply.
one is AC the other is DC
either a rectifier or a motor generator
the bridge rectifier ( its a diode pack arranged in such a way as to only allow positive electrons to one wire and negative to the other side )
The battery is charged by a generator that runs through a regulator-rectifier. The generator outputs AC voltage and the rectifier converts the voltage to DC. The generator is normally mounted inside the engine on the flywheel.
Bridge diodes are generally used in a bridge rectifier to convert AC into DC.
Ac x 1.4 -1.4=dc
Use a full wave bridge rectifier.
give answer how to control the speed of dc motor using bridge rectifier ? ANSWER: A bridge rectifier by itself does not control anything it merely convert AC into DC. the controlling is done by other means SCR TRIACS AND SERVO loop
Yes, if the diodes that the bridge rectifier are rated for 230V in forward and reverse voltages. Normally you can do a search for the part number on the internet and get specs there.