The Polaris Ranger utility vehicle. Listed in owners manual for the 2006 anyway.
Honda Fit Spark plug gap is .043 in or 1.1 mm.
.44
A drain plug for a spark plug? Now why would there be? What would you drain from a spark plug.... the spark? If you're referring to a plug for the spark plug socket, I'm sure you could find something that would fit that would keep out debris while you let you engine sit without plugs. (Why??)
None. Champion plugs should NEVER be used in a GTI. They will carbon up your cap and rotor and cause nothing but problems. You should only run Bosch or NGK copper plugs.
13ft/lbs
No. They are two completely different units.
Not really. If you remove the center cover on the top of the engine you'll see that there are spark plug "boots" that fit down on the spark plugs.
you get a spark plug socket or one of similar size to fit the spark plugs, then you just put it in the correct location and screw it in snuggly(not too tight cause you will break the ceramic casing), then connect all the spark plug wires
1987 for 5.0
no, it takes the same socket as the others. most likely something is down in the hole next to the spark plug
In your tool kit you should have a rench that will fit on the plug. You pull off the spark plug wire and take out the spark plug. Make sure the gap is set right for the new plug and put in in. Do not over tighten.