0
You will find it behind the plastic lower dash panel. Both signal and 4-way flashers are there. The lower dash panel must be removed to gain access.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What does a flasher look like for a 1990 Chevy Celebrity?
This site will show a picture of a typical flasher oreillyauto.com They come in different colors, but all look about the same shape. You will find the flasher on the fuse block.
Where is the flasher located on a 1987 Chevy Celebrity?
look under dash on drivers side, looks like a silver film cannister
What does a flasher relay look like for a 2000 durango?
what does a flasher relay in 2000 dodge durango look like.
Where is the flasher relay on a 2003 Chevy Malibu?
The flasher relay on a 2003 Chevy Malibu is located under the dash near the steering wheel. Look for a bright green plug.
Where is the flasher located and what does it look like on a 1996 Chrysler town and country van?
The tuirn signal flasher is located in complete module attached to the turn signal lever. It is all one solid unit.
Where is the flasher located on a 1988 Chevy Cavalier?
1988 chevy cavalier flasher take ash tray and bracket out look up and lift you can see it if not you can put your hand up in to lift and find it.
What does the indicator flasher relay look like?
what does the indicator flasher look like as warning for your oil change 2006 cls 500 Mercedes
Where is the flasher for a 1996 Chevy c1500?
Look in or around the fuse panel --left side of steering column
What does a diagram of a 1996 Chevy cavalier serpentine belt look like?
Providing your cavalier has a 2.2l, this is what your looking at.
Where is flasher unit in 1996 Oldsmobile bravada?
it is located in the glove compartment ,look around you'll find it .
What does the flasher on a 2002 Chevrolet Silverado look like?
A turn signal flasher for that vehicle resembles a relay.
Where is the flasher unit located in a 2000 Chevy Venture van?
Hi, The flasher unit is mounted above the base of the steering column. It will look like a little square or rectangle and will plugged into the end of a cable. You will have to remove the knee bolster on the driver side to get to it. Good Luck, Greg
