about two fiddy
Right next to the windshield washer reservoir.
It is connected to the washer tank.
NO!
If the sensor is functioning properly, when you add the washer fluid the light should turn off automatically; no additional action required.
Assuming you mean the low windshield washer fluid indicator, by just filling the reservoir with windshield washer fluid, the light should turn off. If not, the low washer fluid sensor may be faulty.
Fill washer resevoir - if it does not shut off possiby a bad sensor
To replace the windshield washer nozzle on a 2006 Saturn Vue, first, lift the hood and locate the nozzle on the windshield wiper arm. Carefully disconnect the washer hose from the nozzle by pulling it off. Then, remove the old nozzle by either unscrewing it or pulling it out, depending on the type. Finally, install the new nozzle by pushing or screwing it in place and reconnecting the washer hose.
Begin by removing the hose from your windshield washer pump. Remove the windshield washer pump wiring harness. Remove the windshield washer pump retaining bolts. Reverse the process to install your new windshield washer pump.
Check for a broken/damaged wire on the sensor that is near the bottom of the washer tank.
A low washer sensor light indicates that the windshield washer fluid level in your vehicle is low. This warning alerts you to refill the washer fluid reservoir to ensure optimal visibility while driving, especially in adverse weather conditions. Ignoring this warning can lead to difficulty in cleaning your windshield, potentially compromising safety. It's advisable to top up the washer fluid as soon as possible.
To disable the low windshield washer fluid indicator light on a 1993 Mitsubishi 3000GT, you can locate the washer fluid level sensor, typically found in the washer fluid reservoir. Disconnect the sensor's electrical connector or remove the sensor entirely; however, this may lead to the light staying on regardless of fluid level. Keep in mind that disabling the indicator is not recommended, as it can prevent you from knowing when to refill the washer fluid.
Remove the wiring harness from the back of your Chevy Lumina windshield washer pump. Remove the windshield washer pump fluid hose. Remove the windshield washer pump retaining bolts. Reverse the process to install the new windshield washer pump.