CSA of cylinder = 2 * pi * r * hSo, 264 = 2 * pi * r * hVolume of cylinder = pi * r2 * hSo, 924 = pi * r2 * hStep 1pi * r2 * h /2 * pi * r * h = 924 / 264Or, r / 2 = 924 / 264Or, r = 924 * 2 / 264Or, r = 7Therefore, Radius = 7cm and Diameter = 2r = 14cmStep 2Or, 2 * pi* 7 * h = 264Or, 44h = 264Or, h = 264 / 44Or, h = 6Therefore, Height = 6cmTherefore, Height is 6cm and Diameter is 14cm
You mean trapezoid? _........-------- \ / \ / \ /_____________.\
You mean ghetto?
If x and y are two positive numbers, with arithmetic mean A, geometric mean G and harmonic mean H, then A ≥ G ≥ H with equality only when x = y.
Whatever you want it to mean
cylinderical
plane waves , spherical waves , cylinderical waves
under the hood on the firewall It's right about under the brake resevoir, black cylinderical.
Larger workenvelope than cartesian and cylinderical robot, design simple, good weight lifting capacity.
The verb heat should be modified to heated.
drop out? do you mean loop? when you start it does it rev high then low, high than low? if it does you need to clean your IAC, its attached to the throttle body by two bolts and cylinderical. soak it in carb cleaner and brush it clean. then reinstall.
A Beaker is a simple container for liquids, very commonly used in labratories. Beakers are generally cylinderical in shape, wih a flat bottom.
It is the cylinderical sheet metal thing about the size of the bottom of a pop can located not far from the black plastic shield that covers your throttle linkage stuff on the top of your engine. It is to the upper left of this shield.
A filament is a thin rod like long structure usually cylinderical in shape i.e. open at both ends.
the Egyptian pyramids are not cube but they are cylinderical shape built of mud made bricks which cannot bare heavy wind if they are not cubical in shape.so the knowledge of Indian idea were taken by egyptians to built pyramid later on it became heareden by wild blowing in all direction.
Parts of screw gauge are: 1)U-Shaped frame 2)Hallow cylinderical tube 3)Index line 4)Milled head(H) 5)Safety device(D) 6)Head scale(Slopped Edge) 7)Pitch scale(mm)
Cone- 1. Cone have mere capacity to wind yarn on it.. 2. Cone is conical in shape.. 3. The grip of yarn is higher.. Cheese- 1. Cheese have less capacity to wind yarn into it.. 2. Cheese is cylinderical in shape.. 3. Cheeses can unwinded from