answersLogoWhite

0

What does fram PH 43 oil filter fit?

Updated: 11/21/2022
User Avatar

Wiki User

7y ago

Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: What does fram PH 43 oil filter fit?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What fram oil filter replaces a wix 51068?

ph-43fp or ph-43


What does a Havoline T-43 oil filter fit?

1978 pontiac Trans Am 400 "Z" vin code


Hb-195pf-43 spa filter replacement cartridge?

yes it is a filter for the speedy pool spa.


How many people can fit in a megalodons mouth?

43


How many people can fit in megalodons mouth?

43


How many people can fit in a megalodon shark's mouth?

43


Will a 43 Vortex fit where a regular 43 was?

Yes. The base engine componants are the same. The differences are the intake and fuel delivery.


How many times does 43 fit into 256?

5 with remainder 41.


How do you change the oil on 2000 explorer?

Change your oil according to the manufacturer's recommendation or every 5,000 miles. Changing more often is a waste of oil and money. Purchase the correct weight of Premium oil of your choice, and a quality filter. More than likely 5w30 weight and 4.5 or 5 quarts with filter change. Read your owner's manual to be sure. Do not overfill!!! I use Pennzoil oil and Purolator filters and I have never had an internal engine problem using these products in 43 years. Crawl under the vehicle and remove the oil pan drain plug, with a socket or boxed end wrench, and drain all the oil into a container. Wipe the drain plug and plug hole with a clean rag, and replace the drain plug when all the oil has drained out. Tighten to about 12 ft/lbs of torque. Important: Do not over-tighten. Find and remove the oil filter, (turn counterclockwise). You may or may not need an oil filter wrench. Wipe the mounting surface clean. Important:Apply a thin coat of oil to the new filter's gasket and install the filter. When the filter makes contact with the mounting surface, turn it around 3/4 turn. Tighten it any more and it may leak or be very difficult to remove. Add the proper amount and correct weight oil by removing the oil fill cap, and using a funnel, pour in the oil. Dispose of the used oil at a recycle center or the place you bought the oil.


How much oil pollution is caused by humans?

43% of the oil pollution taht happens is caused by humans.


What percent of the worlds oil production is produced by OPEC?

43 percent


How much oil do you put in during an oil change for your Mazda 3 2005?

2005 MAZDA MAZDA3 2.3L 4-cyl EngineFiltersOil Filter, Wix # 57203Air Filter, Wix # 42612CAPACITIESEngine, with filter..........4.6 quarts[1]Cooling System, Initial Fill..........8.0 quartsAutomatic Transmission, 5-Shallow PanD Initial Fill..........3.2 quarts[2]Automatic Transmission, Total Fill..........7.6 quartsManual Transmission, ..........6.1 pints1. After refill check oil level.2. With ENG at operating temperature, shift through allgears. Check fluid level in PARK and add fluid as needed.TORQUESOil Drain Plug.....22-30 ft-lbsManual TransmissionFill Plug.....29-43 ft-lbsDrain Plug.....29-43 ft-lbs2005 MAZDA MAZDA3 2.0L 4-cyl EngineFiltersOil Filter, Wix # 51215Air Filter, Wix # 42612 CAPACITIESEngine, with filter..........4.6 quarts[1]Cooling System, Initial Fill..........8.0 quartsAutomatic Transmission, 5-Shallow PanD Initial Fill..........3.2 quarts[2]Automatic Transmission, Total Fill..........7.6 quartsManual Transmission, ..........6.1 pints1. After refill check oil level.2. With ENG at operating temperature, shift through allgears. Check fluid level in PARK and add fluid as needed.TORQUESOil Drain Plug.....22-30 ft-lbsManual TransmissionFill Plug.....29-43 ft-lbsDrain Plug.....29-43 ft-lbsHope This Helps.