0
What does it mean when the clutch sticks all the way to the floor on a 1997 Chevy cavalier z 24?
Wiki User
∙ 11y ago
The clutch release ("throw-out") bearing has gone bad...Use a new clutch disc when you replace the clutch release bearing...or it could be the clutch master cylinder. Check the master cylinder first...Look for any sign of leakage from either component .
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you adjust shift linkage on 95 Chevy cavalier?
92 cavalier 31 clutch has to be on floor and still shifts hard
The clutch pedal on your 89 240sx sticks to the floor it has a new clutch what do you do?
Bleed the slave cyl. It probebly has air in the line or no fluid.
How do you get pressure back in clutch pedal it goes right to the floor and sticks?
turn your car on and pump the peddel with your hand till u get pressure then get a new clutch and master cylinder for the clutch
Clutch is sticking to the floor of your 1998 Honda civic only sometimes?
The clutch sticks to the floor sometimes if the pedal does not return to pressure plate, which has metal fingers arranged concentrically. YouÊneed to check the master clutch cylinder container to see if the fluid has all leaked out.
How can a adjust the clutch pedal on my 1993 Chevy s10 pickup to make it disengage the clutch closer to the floor?
where and how to adjust clutch pedal 1993 s10 It is hydraulic operated, there is no adjustment.
Why does my clutch pedal on my 1997 Chevy S-10 go all the way to the floor when pressed Does it need adjustment If so how do I do that?
There is no adjustment on this clutch. The clutch is hydrolic, you may need to bleed it.
In your 1992 Chevy Camaro rs your clutch pushes all the way to the floor but does not shift gears when started whats wrong with it?
Either have air in your lines or you might need a new clutch plate.
Why wont your clutch work?
my clutch went to the floor what happened?
Why does your clutch pedal touch the floor?
It's called: Your clutch is working.
2005 Sunfire clutch is stuck to the floor?
Well, we need lots more information here. Is the clutch pedal actually "stuck" to the floor? In other words, can you NOT lift the pedal up to the normal position? OR, has the clutch pedal "fallen" to the floor due to no resistance from the clutch?
Why does my clutch pedal go straight to the floor and stays down with no pressure?
You have a broken clutch.
Rover mg zt clutch pedal gone to the floor?
The clutch cable has proabably broken.
