0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is laminated spring?
the leaf spring on a vehicle's axle is an example
Is it better to install leaf spring over the rear axle or under?
it all depends on what your using the car or truck for
How can l lower my 1989 Chevrolet cheyenne in the rear It has leaf springs?
if the axle is on top of the spring: get a pair of longer front spring shackle if the spring is under the axle: Get a pair of spring blocks.
How many inches of block lift can be put on an 1988 Jeep Comanche without modifying brake lines or suspension etc?
None. The Comanche uses a spring under axle setup and blocking the axle would lower the vehicle. However, if you can use a torch and weld, you can cut your spring mounts, do some grinding and relocate them to the topside of the axle housing, and turn it into a spring over axle setup, giving you about 4.5in. of lift in the rear.
What is the difference between split axle and tandem axle trailers?
Tandem axles are connected by spring Multi axle trailers Shipyard Transporters
What does per axle mean?
axle means to do with a car
Will a 1993 Jeep Cherokee rear end fit in a 1992 Jeep wrangler?
Not exactly, yj's were a spring under desiegn while the xj's were spring over. Width wise, the xj rear will work, but you'll either have change the spring perches on the axle, or change your center pin in your springs.
What does axle mean?
The maximum weight the front axle is designed to carry.
What does axle weight mean?
The maximum weight the front axle is designed to carry.
What causes 5th wheel travel trailer to lean?
a brokin or weak spring on the axle of the trailer
How do you change the front left cv axle on a 1997 Plymouth voyger 3.3 liter?
remove wheel and caliper. remove axle nut undo tie rod end remove horizontal bolt at the bottom of spring and strut assembly that attaches it to lower control arm pry down on lower control arm and the spring assembly will swing out and away from axle axle should now pull out of tranny
How do you change a rear coil spring on a 1998 Kia Sportage?
Jack up the rear of the vehical and support it on jack stands from the FRAME, not the axel. From here, there are two possible choices. If the old spring is broken, simply pull it out by hand, if it hasn't already fallen out. To install the new spring, either use spring compressors (typically used for struts) to compress the new spring down enough to fit between the axle and the frame, or remove the shock on the side you are working on, while supporting the axle with a jack. Once the shock is removed (it is only necessary to remove 1 end), lower the axle enough using the jack to allow the new spring to fit. Raise the axle in place, reinstall the shock, and lower the vehicle .
