I recently had a problem with my ABS light coming on in my '03 Ford Explorer v6 flex fuel. I took it to the Ford Dealer and had them run a diagnostic on it and they said it was because of a code c1440, which was a Brake Deactivation Switch. The part cost about $20. Hope this helps someone.
There are several ABS trouble codes for a Chevrolet automobile. The most common ABS trouble code is; error code 628.
You have to repair the malfunction that caused the code stored in the abs computer.You have to repair the malfunction that caused the code stored in the abs computer.
The "main relay" is inside the abs computer. If you have the Main Relay code, the abs computer has failed.
Because the abs computer has detected a malfunction and set a code. Have the abs checked for codes and you will know what to diagnose.
The abs computer has detected a malfunction and set a code.
It's a warning that something has gone wrong with the ABS system. You'll need to have an ABS code scanner connected to read the brake codes. Unfortunately, ABS code scanners aren't yet available to the public the way engine code scanners are.
It is on because the abs computer has detected a malfunction and set a code.
The ABS computer has detected a malfuction and set a code.
Failed ABS pump assembly.Failed ABS pump assembly.
You need to find out what is tripping the ABS light (a mechanic with an ABS code reader) and then repair it.
The abs and brake light come on when the computer detects a problwm and sets a code. After reading the code, and repairing the cause of the code, you clear the code with a scan tool.
abs relay