In household wiring the black or red is active, live, or hot.
3 colors? red black green and yellow? i count 4... red is your active, or live wire. black is return, or negative wire. green is your earthing wire and yellow is more than likely a control, for a switch, possibly a heating fan or towel railing?
The Active wire is always either Red (in a 3 core Red, Black and Green cable) or Brown (in a 3 core Brown, Blue and Green/Yellow cable). You can also be electrocuted by the neutral (Black or Blue) wire if the active is still supplying current through a device. The only truly safe way to handle mains wiring is to completely isolate the circuit at the fuse board.
grooved wire mean earth wire smooth wire mean suply wire
Active.
In household wiring the black or red is active, live, or hot.
piggyback entry
water is a conductor of electricity so when a live wire is placed into water the current can spread out through the water.
Green with Yellow Stripe Wire - Earth Wire (E) Blue Wire - Neutral Wire (N) Brown Wire - Live Wire (L) When you look at the plug with the terminals facing towards you: /\ / \ / E \ / \ / \ / L N \ ------------------
The high beam wire on the 2004 Toyota Tacoma is red with yellow stripes. You can use a test light to determine which wire is active when the high beams are on.
Not so. We see birds sitting on active high lines all the time.
If you mean switching LAN cables when the connection is active, then the answer is yes.
The green wire is for ground. You can attach that to any metal part of the frame. The red is the active and coincides with the lefthand prong into the plug and the black in this case should be the Neutral and ciocides with the right prong into the plug as seen standing behind the plug.
3 colors? red black green and yellow? i count 4... red is your active, or live wire. black is return, or negative wire. green is your earthing wire and yellow is more than likely a control, for a switch, possibly a heating fan or towel railing?
The Active wire is always either Red (in a 3 core Red, Black and Green cable) or Brown (in a 3 core Brown, Blue and Green/Yellow cable). You can also be electrocuted by the neutral (Black or Blue) wire if the active is still supplying current through a device. The only truly safe way to handle mains wiring is to completely isolate the circuit at the fuse board.
If it is not a factory stereo, you will need a GM class2 data bus interface device in order to keep other car devices active.
Acid itself cannot generate electricity. The electricity is generated by the flow of the electrons. So we can use active metal & inactive medal with acid to generate electricity. For example. If you put a copper rod and a zinc rod in acid solution (for example, HCl), connect the two rods with a conductive wire (metal wire). The the electricity will be generated because the electrons will move from the Zinc (active) rod to the copper (inactive) rod