Hi # The crank sensor is located in the center above the harmonic balancer on the EF motor. # Mine has 2 white wires attached to a plastic connection which plugs into the crank sensor. Hope this helps. Sam
yes ,but really this sensor work like a (MD)sensor,(misfire detention),it is front the engine ,over the cranfshaft pulley.
the crank potion sensor is located under the front end of the car directly in front of the transmission. Actually when you look at it, it almost looks like it goes in to the trans.
if it has a v6 it's behind crankshaft pulley,if its a 4 cyl.in the block
The engine has gotten wet or the spark plug wires need to be replaced. If they are all right the CKP (Crankshaft Position Sensor) is in need of replacement.
you have to gap the crank sensor when u install it, the sensor should have a paper in the box that tells u what to gap it at. you will need brass feeler gauges because the sensor is magnetic
I need to see what a 1970 ford falcon looks like
Crank sensor is in the top of the transmission housing at the back of the engine. Cam position sensor is in the distributor.
looks like a normal sensor, I have a 2002 intrigue, it is located just above the starter, you have to take out the starter in order to take it out.
looks similar to the camshaft sensor, but it's located in the bell housing on the transmission on passenger side.
There might be but more info is needed like the year, make, model and engine info.
The crankshaft sensor is located at the back of the engine (4.0), and just above the bellhousing for the transmission. It is on the drivers side, and i believe it has a yellow cover on it. i may not be remembering it correctly, but it seems like its yellow.
sounds like the crankshaft sensor is bad