answersLogoWhite

0


Best Answer

What does the water outlet housing look like 2001 Sebring (2.7liters) V6?

It depends on the engine type... For the 2.7L V6 engine code R it looks like a black plastic piece with three hoses going into it. It has a brass bleed valve on the very top and the coolant temp sensor mounted vertically just below it. It is mounted on top of the engine block on the passenger side. Search for 902-302 for an aftermarket solution.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What does the water outlet housing look like 2004 sebring?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the thermostat in a 2004 Chrysler Sebring convertible?

The thermostat for a 2004 Sebring Convertable is in under the water outlet for the BOTTOM radiator hose. This is behind the alternator which will have to be removed, after you remove the belts. Plan on an afternoon of work. Hope this helps.


Trans axle bell housing location on Chrysler sebring 2004?

The bell housing is the part of the transmission case that bolts to the engine.


Where is the thermostat on a 2.4 L 2004 Sebring Convertible?

Under the housing where the upper radiator hose hooks to the engine.


Where is the thermostat on a 2004 Chrysler Sebring 2.7 liter?

The thermostat is under the housing where the lower radiator hose attaches to the engine.


Where is the air filter located on a 2004 Chrysler sebring convertible?

It is inside the black plastic housing under the hood, driver side.


Where is the thermostat on a 2004 Chrysler Sebring with 2.7 liter engine?

It is located under the housing where the lower radiator hose hooks to the engine.


Where is the thersomstat on a 2004 Chrysler Sebring?

Answer Should be in a removable housing at the engine end of the upper radiator hose. On the 2.7L it is where the lower radiator hose attaches.


Where is Egr location on a 2004 Chrysler sebring?

The EGR valve is mounted on the rear of the engine. It is connected to two pipes, just above the bell housing.


What is the name of pipe work that houses the thermostat on a 2004 Chrysler concord?

On a 2.7L the thermostat is on the lower hose. If you are looking for the part on top it is called the upper water outlet. On a 3.5L it is called a thermostat housing.


Where is the water pump on a 2004 Chrysler Sebring?

The water pump is inside the passenger side of the engine, driven by the timing belt or chain.


Engine oil capacity of a 2004 Chrysler sebring?

2004 CHRYSLER SEBRING COUPE = 4.6 Qts W/Filter 2004 CHRYSLER SEBRING SEDAN = 5 Qts W/Filter Hope This Helps.


Where is the thermostat housing on a 2004 Chrysler Sebring Convertible?

Four cylinder, it is where the upper radiator hose attaches to the engine. Six cylinder, it is where the lower radiator hose attaches to the engine.