Want this question answered?
To reset the service engine soon light on a 2006 Mercury Mountaineer, you can buy a scan tool. Make sure you note down the numbers before scanning.
( 5 quarts ) with engine oil filter change for the 4.0 liter SOHC , V6 engine in a 2006 Mercury Mountaineer
According to the 2006 Mercury Mountaineer owners manual : ( # 14 is a 20 amp fuse for the horn ) * in the fuse panel below the instrument panel on the drivers side *
Where the fuse for the side rail on my truck
If you are going over an uneven surface, the light may come on because one wheel is spinning faster then the others.
You can view the 2006 Mercury Mountaineer owner manual online at : www . motorcraft service . com ( no spaces ) Click on Owner Guides Page 219 explains what to do if you can't shift out of PARK with the brake pedal depressed You can also check for a blown fuse for the brake light circuit.
Mounted on top and inside the fuel tank.
You can find the five digit numbers for the keypad on a 2006 Mercury Mountaineer in the owners manual. You can also call the dealership and ask for a the code or take the vehicle in for a new code to be programmed.
Go to dealer...and they will change them to early.
It doesn't have a dipstick for the automatic transmission - not since the 2002 model
Well, it holds about 6 gallons, letting it role on for about 7 hours with a full tank hope i helped =========================================================== According to the 2006 Mercury Mountaineer Owner Guide : The fuel tank holds ( 22.5 U.S. gallons ) ( Helpfull )
The wrench light in any car means your engine needs attention.