can weld aluminium with a mig or tig welder
You will probably need too weld any holes in your aluminum livestock trailer. It is best to higher a professional welder as this can be very dangerous.
the best way to get a good looking/ strong weld on aluminum is using a tig welder it is also possibles with a mig welder but for best results recommend a tig welder with HF
the only way you can weld aluminum is with AC current and high freak setting on the welder , if your welder does not have theses setting then it will not weld aluminum. Good answer! AC is a must! The only other way is if you have an oxy/ace setup (very low psi) or alot of mapp gas, but you have to spread a flux paste on the material (looks like drywall mud) EXTREMELY MESSY!
Yes, find someone with a tig welder.
Yes it can by using a special aluminum rod for the DC welder, but it is very difficult to do without a lot of practice. Much easier using a mig welder with a spool attachment.
According to my research in order to become a Welder you will need to take a test to receive your Welder's certificate. Once you get the certificate you can apply for jobs.
When you refer to a 200 amp welder you are talking about the output side of the welder. What you have to do is find out what the input voltage and current of the welder is to calculate the size of a generator needed to operate the welder.
that depends on the size of the welder. some welders can be used with a 110V outlet and others need a 220V. the size of the welder is the decider on that. Tech Ed Ted
No Unless you have a newer model welder that is CC & CV, and then they do not do aluminum unless you get into the high end inverter models. Wire welding uses the CV (constant Voltage) and tig is CC (constant current)
In order to weld pieces of 6mm steel you can use any type of welder. Depending on how strong and how pretty the weld needs to be will determine the type of welder you choose.
The best fix would be to weld it yes. To do a proper weld on aluminum you are going to want to only use a TIG welder. You can also have decent results with industrial J-B Weld. The area would need to be properly prepped and cleaned though for best results.